Carbon or Stainless? Caring for Your New Marttiini Knife

Date Posted:18 November 2026 

Care guide

Carbon or Stainless? Caring for Your New Marttiini Knife

By Xhunter Team · Updated December 2026 · 2 min read

 

Most people assume stainless steel is simply the better choice for a knife. It isn't better, just easier: carbon steel takes a keener edge and is easier to resharpen, but it rusts if it's put away wet. So if he unwrapped a Marttiini this Christmas, the first job is to find out which steel he's got, because the care is different.

Which steel is his knife?

Marttiini makes both kinds. Among the knives we stock, the Condor Timberjack, Moose Black and Lynx Black Edition use carbon steel, and so do the axe heads. The 19 cm filleting knife, the Condor and Martef hunting knives, the Wild Boar, the Lynx 121 and the Järvi are stainless.

The chart below compares the hardness of three Marttiini blades on the Rockwell C (HRC) scale. A higher number means a harder edge that stays sharp longer, though it can take a little more effort to resharpen.

Hardness of three Marttiini blades (HRC) Wild Boar: stainless X46Cr13 53.5–55 Moose Black: carbon X75Cr1 55–57 Lynx Black Edition: carbon 80CrV2 59.5 0 20 40 60 Ratings from Marttiini. Bars show the top of each range.
Published hardness ratings of three Marttiini blades.

Hardness and steel type are separate things. The two carbon steel models sit higher on the scale here, but what decides the care routine is whether the steel is stainless, not how hard it is.

Looking after a stainless knife

Stainless steel resists rust, which is why it suits filleting knives that spend their lives around salt water. Rinse it in fresh water after use, especially after fishing, and dry it before it goes back in the sheath. That's most of the job. Hand-wash it rather than using the dishwasher, which is hard on both the edge and a birch handle.

Looking after a carbon steel knife

Say he takes his new Moose Black on a Boxing Day camping trip and uses it to slice the leftover ham. Carbon steel reacts with moisture and acids, so it needs about a minute of attention after each use. The diagram below shows the routine.

Carbon steel care after every use 1 Wipe it clean remove blood, fish slime and food 2 Dry it completely blade, spine and ferrule 3 Oil the blade lightly a thin film of food-safe oil 4 Store it dry out of the sheath if it's damp
A simple care routine for a carbon steel Marttiini knife after each use.

Over time, a carbon blade darkens to a grey patina. That's normal and actually helps protect the steel, so there's no need to scrub it off. Orange rust spots are the thing to watch for; rub them off early with a little oil on a cloth. The same routine applies to the axe heads, and the leather covers should go back on only once the head is dry.

Caring for the leather sheath and birch handle

The leather sheath and the wooden handle are the parts most people forget. Let a wet sheath dry naturally, away from the fire or a heater, which can shrink and crack the leather. A waxed or oiled birch handle benefits from a light wipe of wax or oil now and then, especially after a trip in the rain.

Our advice for anyone who's just received a Marttiini: check the steel, then build the habit from the first use. A stainless knife needs a rinse and a dry; a carbon knife needs a rinse, a dry and a drop of oil. Do that, and the knife he unwrapped this Christmas will still be working long after the next one.

Explore the Marttiini range

Check the current price on Marttiini knives, axes and accessories.

Shop Marttiini at Xhunter

Knife Care FAQ

Is carbon steel or stainless steel better for a knife?

Neither is better overall. Carbon steel takes a very keen edge and is easy to resharpen, but it rusts if left wet, so it suits someone who looks after their gear. Stainless steel resists rust and needs only a rinse and dry, which suits fishing and occasional use. Marttiini makes knives in both steels.

How do I stop my carbon steel knife from rusting?

Wipe the blade clean after every use, dry it completely and apply a thin film of food-safe oil before storing it. Keep it out of a damp sheath until both are dry. If orange rust spots appear, rub them off early with a little oil on a cloth. A darker grey patina is normal and helps protect the steel.

Which Marttiini knives are carbon steel?

Among the Marttiini models Xhunter stocks, the Condor Timberjack, the Moose Black and the Lynx Black Edition have carbon steel blades, and all three axes have carbon steel heads. The 19 cm filleting knife, Condor and Martef hunting knives, Wild Boar, Lynx 121 and Järvi annual knife are stainless.

Can Marttiini knives go in the dishwasher?

We'd always hand-wash a Marttiini knife. Dishwasher heat, detergent and knocking against other items are hard on a fine edge and can damage wooden handles like birch. Rinse the knife in warm water, dry it straight away and, for carbon steel, add a thin film of oil before storing it.

Why has my carbon steel knife turned grey?

A grey or dark patina is a normal reaction between carbon steel and moisture, food or blood. It isn't rust, and it actually helps protect the blade from corrosion. There's no need to scrub it off. Orange or reddish spots are rust; remove those early with a little oil on a cloth and dry the blade more thoroughly after use.

How do I look after a leather knife sheath?

Let a wet sheath dry naturally at room temperature, away from a fire or heater, which can shrink and crack the leather. Don't store a wet knife in it, especially a carbon steel one. A light leather conditioner now and then keeps it supple. A well-kept sheath holds the knife securely for years.

Do stainless knives need oiling?

Stainless knives don't need regular oiling the way carbon steel does. A rinse in fresh water and a thorough dry after use is usually enough, especially after fishing in salt water. A drop of oil on the blade before long-term storage does no harm, and it's a good habit if the knife lives in a damp tackle box.

How do I care for a Marttiini axe?

Marttiini axe heads are carbon steel, so dry the head after use and wipe on a thin film of oil before storing it. Put the leather cover back on only once the head is dry. Keep the ash handle out of the weather, and wipe it with a little oil now and then to stop it drying out and splitting.

How do I care for a curly birch handle?

Wipe the handle clean and dry after use, and keep it away from soaking water and the dishwasher. Every so often, rub in a light coat of wax or oil to keep the wood from drying out. Marttiini finishes handles such as the Wild Boar's and Moose Black's with wax, and the Lynx Black Edition's with oil, so topping that up keeps the grain looking its best.

Steel types and hardness ratings are based on Marttiini's published specifications.