The Harris #S-L2 Low Rise 9–13" Self-Leveling Swivel M-LOK Bipod provides mechanical front-end rifle stabilization for field marksmen and target shooters. Designed and manufactured in the USA by Harris Engineering, this model integrates directly into standard M-LOK handguards and chassis without requiring intermediate Picatinny rails or sling-stud conversion plates. It features a Series S swiveling base that tilts side-to-side to level crosshairs on uneven ground, paired with smooth-extending L2 legs that adjust continuously between 9 inches and 13 inches (approximately 22.8 cm to 33.0 cm) and lock in place via individual thumb-screw collars.

Key Features

• Direct M-LOK Attachment: Secures directly to standard M-LOK slots using a 1/8" hex key interface, reducing overall stack height and eliminating snag points.
• Series S Cant Swivel: Built-in swivel mechanism allows side-to-side tilting to level the rifle on sloped terrain, controlled by an adjustable polymer rear tension knob.
• Continuous L2 Leg Extension: Smooth, spring-assisted legs pull out silently and secure at any custom height within the travel range using manual thumb screws.
• Spring-Tension Stowage: Legs fold forward toward the muzzle for streamlined carry and lock firmly into deployed or folded positions.
• Durable Construction: Built from heat-treated steel and high-strength hard alloys with an anodized black finish and hard rubber foot caps.
• Integrated Sling Swivel Stud: Features a bottom-mounted stud for attaching standard rifle slings directly below the bipod chassis.

Specifications

• Height Adjustment Range: 9 inches to 13 inches (22.8 cm to 33.0 cm)
• Weight: 12.4 oz (approx. 351.5 g)
• Mounting Interface: Direct M-LOK
• Adjustment Type: Smooth self-leveling extension with thumb-screw locks (non-notched)
• Rotation / Tilt: Series S swivel (cant adjustment)
• Material: Heat-treated steel, hard alloy, polymer knob, hard rubber feet
• Finish: Anodized Black
• Power Requirements: None (fully mechanical)

Who is the Harris #S-L2 Low Rise 9-13" Self Leveling Swivel M-Lok Bipod for?

• Prone field hunters — requires the 9 to 13 inch elevation range of this M-LOK bipod to maintain line of sight over uneven dirt, snow, and low ground vegetation while using the integrated swivel mechanism to level crosshairs on rolling terrain.
• Benchrest target shooters — benefits from the direct-mount M-LOK attachment and the rigid 12.4 oz alloy-and-steel chassis, ensuring a secure, low-profile anchor to modern handguards without adapter play.
• Varmint hunters — utilizes the 9 to 13 inch height extension and smooth-adjusting thumb-screw leg collars on this M-LOK rifle bipod to adapt quickly to moderate grass clearance without being locked into fixed 1-inch notch increments.

Less suitable for: Shooters operating from manicured flat surfaces or ultra-low prone positions where a shorter 6 to 9 inch bipod provides better geometry; hunters requiring upright seated or kneeling positions over tall brush who need an extended 12 to 25 inch bipod; or rifle platforms equipped exclusively with traditional swivel studs that require a standard sling-stud mounting interface.