The Hawke Match Mount 30mm 2 Piece 9–11mm Medium (Model: 22107) is a two-piece dovetail scope ring set engineered to secure 30 mm (1.18 in) maintube riflescopes to standard 9–11 mm and 3/8" grooved receivers. Constructed from high-grade aluminium with an anodised matte black finish, the set weighs 88 g (3.1 oz) and provides a total height profile of 45 mm (1.77 in / ~1.8 in), positioning the scope centreline approximately 1.1 in above the base.

Key Features

• Precision Match Profile: Rounded edges minimise the risk of pinching, marking, or scratching the optic tube during installation.
• Internal Cushion Tape: Factory-fitted internal lining protects tube finishes and enhances non-slip grip under recoil.
• Integrated Recoil Stop Pin: Built-in retractable and removable stop pin anchors into receiver recesses to prevent forward or rearward scope movement.
• Double Hex Clamping: Features a 4-screw top cap and a 2-screw base clamp per mount using M4 × 0.7 threaded hardware (3 mm hex) for balanced, uniform clamping pressure.
• Reversible Clamp Plate: Accommodates standard 9–11 mm airgun and rimfire grooved dovetail rails as well as 3/8" profiles.

Specifications

• Ring Diameter: 30 mm (1.18 in)
• Rail Compatibility: 9–11 mm Dovetail (and 3/8" grooved receivers)
• Profile Height: Medium (total height: 45 mm / 1.77 in; scope centreline: ~1.1 in above base)
• Weight: 88 g (3.1 oz) total set
• Material: High-grade aluminium
• Finish: Anodised matte black
• Hardware: 3 mm hex screws, M4 × 0.7 thread

Who is the Hawke Match Mount 30mm 2 Piece 9-11mm Medium for?

• Rimfire pest control shooters using .22 LR or .17 HMR rifles — Requires securing 30 mm (1.18 in) maintube optics to 9–11 mm grooved receivers using an 88 g (3.1 oz) two-piece dovetail scope ring set that maintains a medium 45 mm (1.77 in / ~1.8 in) total height.
• Air rifle hunters using spring-piston or PCP platforms — Needs an integrated recoil stop pin and double hex clamping on 9–11 mm dovetail rails to withstand two-way spring recoil while mounting 30 mm (1.18 in) tube scopes.

Less suitable for: Firearms equipped with standard Weaver or MIL-STD-1913 Picatinny rails (which require dedicated cross-slot Picatinny rings), or optical setups with objective lens diameters exceeding approximately 40–44 mm (which require a high-profile dovetail mount to provide adequate barrel clearance).