The Hawke Match Mount Weaver 2pc 30mm Low (Model 22115) is a lightweight, two-piece mounting system engineered to attach 30 mm maintube riflescopes to firearms with standard Weaver rails. Featuring a low overall height profile of 44 mm (1.7 in) and a base-to-ring saddle clearance of approximately 5 mm, this mount brings the optical axis as close to the rifle bore as possible. Built from high-grade anodised aluminium in a matte black finish, the pair weighs 84 g (3.0 oz), keeping added mass minimal on hunting and field rifles. The design incorporates pre-installed internal cushion tape to protect scope tubes from surface marring, paired with double-hex top cap screws and integrated Weaver recoil crossbars for stable retention under fire.

Key Features

• Low Height Profile: Measures 44 mm in overall height (with ~5 mm saddle clearance) to maintain a natural cheek weld on factory sporter stocks.
• Internal Tube Protection: Features pre-installed internal cushion tape and rounded edges to prevent crimping and scratching on 30 mm optic bodies.
• Secure Double-Hex Clamping: Utilises double M4 × 0.7 hex screws (3 mm drive) on the top caps to distribute clamping pressure evenly.
• Weaver Rail Interface: Clamps to standard Weaver bases using M3.5 × 0.6 hex screws, relying on an integral recoil crossbar to prevent forward or rearward movement under recoil.
• Lightweight Construction: High-grade aluminium build keeps the total weight of the two-piece set to 84 g.

Specifications

• Ring Diameter: 30 mm
• Profile Height: Low (44 mm / 1.7 in overall height; ~5 mm saddle clearance)
• Weight: 84 g (3.0 oz) per pair
• Material: High-grade anodised aluminium
• Finish: Matte black
• Rail Mount Interface: Weaver (with integrated recoil crossbar)
• Top Cap Fasteners: Double hex screws (3 mm hex drive, M4 × 0.7)
• Base Clamp Fasteners: Hex screw (3 mm hex drive, M3.5 × 0.6)
• Internal Lining: Cushion tape pre-installed

Who is the Hawke Match Mount Weaver 30mm Low for?

• Hunters using standard sporter stocks — Requires the 44 mm overall height of this two-piece low scope ring to maintain a low optical axis and proper cheek weld without needing raised comb cheekpieces.
• Rimfire and airgun shooters mounting compact 30 mm optics — Benefits from the 84 g combined weight of this two-piece low scope ring to mount compact 30 mm LPVOs and target optics without shifting firearm balance.

Less suitable for: Riflescopes with 50 mm or 56 mm objective bells that require medium or high profile scope rings to clear the barrel, or extreme magnum calibres that require steel or heavy-duty tactical mounting systems.