The Hawke Match Mount 30mm 2 Piece Weaver High (Model 22117) is an unpowered, mechanical mounting system engineered to secure 30mm riflescopes to Weaver and standard Picatinny rails. Constructed from high-grade anodised aluminium alloy with a matte black finish, the set provides an overall height of 53 mm (2.1 in) to clear large-diameter objective lenses. Weighing 88 g (3.1 oz) for the pair, these high-profile rings maintain structural rigidity without adding unnecessary weight to the firearm platform.

Key Features

• Double Hex Screw Clamping: Features two hex screws per side (four screws per ring) to apply even clamping pressure across the scope tube and prevent optic slippage under recoil.
• Internal Cushion Tape: Factory-installed internal tape lines the inside of each ring to protect 30mm riflescope maintubes against cosmetic marring and scratches during setup and use.
• Integrated Recoil Crossbar: Incorporates a fixed Weaver-style crossbar in the base to seat firmly within rail cross-slots and resist horizontal recoil forces.
• Engineered Contouring: Designed with rounded edges to prevent gouging or binding against the scope body during installation and alignment.

Product Specifications

• Product Name: Hawke Match Mount 30mm 2 Piece Weaver High
• Model / SKU: 22117
• Maintube Diameter: 30 mm
• Rail Compatibility: Weaver rails and standard Picatinny rails
• Profile Height: High profile; 53 mm (2.1 in) overall height
• Total Weight: 88 g (3.1 oz) for the pair
• Material & Finish: High-grade anodised aluminium alloy, matte black
• Fastener Configuration: Double hex ring cap screws (four per ring)

Who is the Hawke Match Mount 30mm Weaver High for?

• Hunters using large-bell centrefire and rimfire optics — The 53 mm (2.1 in) overall height of this 30mm weaver high scope ring provides the necessary clearance above the rifle barrel and receiver for scopes featuring 50mm to 56mm objective lenses.
• Air rifle and sporting shooters — The dual hex-screw retention system with two hex screws per side keeps optics anchored under two-way spring-piston or pneumatic recoil while maintaining a lightweight total system mass of 88 g (3.1 oz).

Less suitable for: Heavy magnum recoiling calibres such as .300 Win Mag and .338 Lapua, which exceed the structural design thresholds of aluminium mounts and require steel tactical scope rings; scopes with smaller 32 mm to 44 mm objective bells, which sit too high on a 53 mm mount and require low or medium profile scope rings to maintain an optimal cheek weld.