Are these ring caps compatible with my existing 30mm Hawke tactical scope rings?

No, the Hawke 22153 is strictly designed for 1-inch (25.4 mm) scope maintubes. If you are running 30mm scope tubes, you will need to look at the Hawke 22154 model instead.

What is the correct torque specification for tightening these ring cap screws to avoid damaging my scope?

Hawke specifies that the cap screws should be torqued precisely to 16 in-lbs (1.8 Nm). Exceeding this torque threshold risks crushing or damaging your scope tube body or stripping the fastener threads.

Can I mount a secondary reflex sight and a tactical torch simultaneously with this set?

Each individual Hawke 22153 cap features a 3-slot Picatinny rail section, so if you purchase a set, you replace both front and rear caps to provide mounting platforms. They are ideal for co-mounting a secondary red dot like the Hawke Frontier 1x24 or an auxiliary hunting illuminator directly above your primary optic.

Do these ring caps require any electrical compliance or SAA certifications for use in Australia?

No, the Hawke 22153 is a fully mechanical, unpowered firearm mounting accessory and does not contain any electrical circuits. Therefore, 240V mains power compatibility, SAA approvals, and RCM electrical regulatory certifications are not applicable for this product.

Picatinny Ring Cap - Hawke 22153

The Hawke 22153 Picatinny Ring Cap Set is an unpowered, passive mounting accessory that replaces standard factory top caps on Hawke 1-inch triple-screw tactical scope ring mounts. Precision-machined from high-grade aluminium with a matte black anodised finish, each ring cap integrates a 3-slot Picatinny rail section directly above the scope centerline. This architecture allows shooters to mount auxiliary hardware—such as secondary reflex red dot optics, hunting torches, or target illuminators—without requiring separate cantilever or receiver-mounted offset bases. To preserve the integrity of the mounted optic, each cap includes internal cushion tape that prevents scope body scratching, marring, or crushing under clamping force.

Key Features

Direct Cap Replacement: Replaces the standard top cap on compatible Hawke Tactical and Match mounts to provide an integrated 3-slot Picatinny top rail.
Heavy-Duty Clamping Interface: Retains a 6-screw configuration (triple Torx T15 screws per side, 6-32 thread size) for recoil resistance across rimfire and heavy centre-fire platforms.
Optic Surface Protection: Features internal cushioning tape to protect 1-inch aluminium scope tubes from cosmetic wear and structural damage.

Specifications

Product Model: Hawke 22153
Maintube Diameter: 1 inch (25.4 mm)
Top Accessory Interface: 3-slot Picatinny rail
Fastener Configuration: Triple screw per side (6-32 thread size, Torx T15 fixings)
Recommended Fastener Torque: 16 in-lbs (1.8 Nm / 1.33 ft-lbs)
Material: High-grade anodised aluminium
Finish: Matte black

Who is the Hawke 1" Triple Screw Picatinny Ring Cap for?

Centre-fire hunters mounting secondary red dot sights — adds a 3-slot Picatinny rail section over a 1-inch (25.4 mm) maintube scope to support secondary micro red dot sights for close-range target acquisition, maintaining structural stability when secured to the factory torque limit of 16 in-lbs (1.8 Nm).
Pest control shooters attaching tactical illumination devices — enables direct top-mounting of auxiliary hunting torches or infrared designators onto 1-inch (25.4 mm) tactical rifle setups using a robust triple-screw Picatinny scope ring cap configuration that secures accessories without shifting optical zero under high-recoil field use.

Less suitable for: Rifle systems equipped with 30mm or 34mm maintube optics, or setups utilizing Hawke double-screw mounts; these platforms require larger-diameter 30mm/34mm tactical ring caps or dual-screw specific mounting hardware to match the ring geometry and maintain proper thread alignment.

SKU	HWK39765LP
Model #	22153
Brand	Hawke
Shipping Weight	1.0000kg

What our Customers are Saying

Recommended Products

Hawke 22108 Scope Mounts 30mm 2 Piece High 9-11mm

$74.95

Hawke 22117 Match Mount 30mm Weaver High 53mm

$83.95

Hawke 22151 Picatinny Ring Cap Set 30mm Mounts

$57.95

Hawke 22405 Dovetail To Weaver Adapter 2-Piece 3/8

$100.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Hawke 22153 Picatinny Ring Cap Set 1 Inch Triple Screw

Secure Payment Methods