The Hawke Precision Steel Ring Mounts 34mm Weaver High (Nut) is a two-piece solid steel mounting system designed to secure large-maintube optics under heavy recoil. Engineered with a 23 mm saddle height and a standard cross-slot base, this mount positions 34 mm scopes at a high profile to ensure barrel and rail clearance for large objective bells up to approximately 79 mm in outer diameter on Weaver and MIL-STD-1913 Picatinny rails.

Key Features

• Solid Steel Construction: High-tensile steel build provides superior rigidity and structural stability over aluminum, resisting ring deformation under repeated magnum centerfire recoil.
• Torx Cap Fasteners: Double T15 Torx screws per ring deliver uniform clamping force across 34 mm scope tubes without stripping screw heads.
• 1/2-Inch Hex Nut Rail Fixing: Hex nut cross-bolts ensure high torque retention and secure mechanical engagement into Weaver and Picatinny rail slots.
• High Saddle Profile: Provides 23 mm of base-to-ring clearance (64 mm overall height) to accommodate large-diameter objective lenses, straight-line stocks, and forward-mounted accessories.

Technical Specifications

• Maintube Diameter: 34 mm
• Profile Height: High (23 mm saddle height; 64 mm overall height)
• Total Weight: 242 g (pair)
• Material: Solid steel
• Mounting Interface: Weaver / Picatinny rail cross-slot fitting
• Cap Fasteners: Double Torx screws per ring (T15, 6-48 thread)
• Base Fasteners: 1/2-inch hex nut (8-32 thread)
• Configuration: 2-piece set

Who is the Hawke Precision Steel 34mm High Ring Mount for?

• Long-Range Precision Rifle Shooters — Needs a rigid 34 mm rifle scope ring with a 23 mm saddle height to maintain zero alignment and provide rail clearance for high-magnification optics with objective bells up to 79 mm.
• Large-Calibre Centerfire Hunters — Requires a 242 g solid steel mount capable of resisting movement and retaining zero under the heavy recoil impulses of magnum hunting calibres on Weaver and Picatinny rails.

Less suitable for: Ultralight backcountry hunting rigs where the 242 g weight is prohibitive (lightweight alloy rings fit this requirement better); optics with 1-inch or 30 mm maintubes (dedicated 1-inch or 30 mm rings are required); setups where outer objective bell diameter exceeds 79 mm (extra-high profile mounts or raised rails are required); or field applications needing toolless removal (quick-detach lever mounts fit this requirement better).