The Hawke Tactical Ring Mounts 1″ 2 Piece Weaver High (Model 24112) is a two-piece aluminium scope mounting system designed to attach 1-inch (25.4 mm) riflescope main tubes to firearms equipped with Weaver or Picatinny rails. Built from high-grade aluminium alloy with a matte black anodised finish, this mounting set features internal cushion tape to protect the optic tube from crimping or marking. An integrated rail crossbar provides mechanical engagement against rail slots to prevent shifting under centerfire, rimfire, or high-energy air rifle recoil.

Key Features

• Triple Torx Cap Screws: Uses three T15 Torx screws per cap (6-32 thread) to evenly distribute clamping pressure across the 1-inch optic tube.
• Internal Cushion Tape: Factory-fitted lining dampens vibration, increases grip, and prevents scope tube surface scratching.
• Heavy-Duty Rail Clamp: Secures firmly to Weaver or Picatinny bases using a 1/2-inch hex nut clamping system (M5x0.8 thread).
• Integrated Recoil Crossbar: Mechanical stop seats directly into rail slots to withstand directional recoil forces.

Specifications

• Ring Diameter: 1 inch (25.4 mm)
• Profile Height: High
• Mounting Interface: Weaver / Picatinny rail
• Configuration: 2-piece ring set
• Top Ring Fixings: Triple Torx T15 screws (6-32 thread)
• Base Fixings: 1/2-inch hex nut (M5x0.8 thread)
• Material & Finish: High-grade aluminium alloy, matte black anodised
• Power Requirement: Passive mechanical hardware (non-powered)

Who is the Hawke Tactical Weaver 1" High for?

• Hunters using bolt-action rifles with large objective scopes — High profile height provides the necessary clearance between the rifle barrel and large objective lenses (typically 50 mm or larger) while securing 1-inch (25.4 mm) main tubes with triple Torx T15 cap screws.
• Shooters mounting optics on modern sporting rifles with Picatinny rails — 1/2-inch hex nut clamping base and integrated recoil crossbars secure 1-inch high scope rings firmly onto Weaver and Picatinny rail platforms under heavy recoil.

Less suitable for: Firearms with standard 9–11 mm or 3/8-inch European/rimfire dovetail rails (requires a dedicated dovetail mount), optics with 30 mm or 34 mm main tubes (requires 30 mm or 34 mm diameter rings), or scopes with compact 32 mm to 40 mm objective bells where low or medium profile mounts provide a better cheek weld and bore axis alignment.