The Hawke Match Mount 1" 2 Piece Weaver High (Model 22114) is a lightweight two-piece scope ring set engineered to mount 1-inch (25.4 mm) riflescope tubes securely to rifles equipped with standard Weaver or Picatinny bases. Constructed from high-grade aluminium finished in matte black anodising, this high-profile mount provides an overall height of 1.9 inches (49 mm), delivering the required physical clearance between the rifle action or barrel and riflescopes featuring large objective lenses, such as 50 mm models or optics with adjustable objective bells.

Key Features

• High-Profile Clearance: Measures 1.9 inches (49 mm) in total height to provide ample barrel and action clearance for large-diameter objective lenses.
• Internal Cushion Tape: Synthetic internal ring tape protects the scope tube finish from pinching, marring, and stress marks caused by recoil.
• Double-Screw Top Caps: Ribbed top caps utilise dual 3 mm hex screws (M4 × 0.7 thread) to apply balanced clamping pressure across the 1-inch main tube.
• Integrated Recoil Crossbar: Built-in base crossbars lock directly into Weaver and Picatinny rail slots to arrest forward movement under recoil.
• Lightweight Build: Weighs 2.9 oz (82 g) for the pair, adding minimal mass to the firearm setup.

Specifications

• Product Type: Two-piece scope ring set
• Tube Diameter: 1 inch (25.4 mm)
• Profile Height: High — 1.9 inches (49 mm) total height
• Weight: 2.9 oz (82 g) per pair
• Material: High-grade anodised aluminium
• Finish: Matte Black
• Mount Interface: Weaver rails (Picatinny crossbar compatible)
• Hardware: 3 mm hex drive screws (M4 × 0.7 top cap, M3.5 × 0.6 rail clamp)

Who is the Hawke Match Mount Weaver High for?

• Shooters running large-objective optics on centrefire or rimfire rifles — provides a total height of 1.9 inches (49 mm) to ensure 1-inch riflescopes with 50 mm or larger objective bells clear the rifle barrel without contacting the action.
• Weight-conscious hunters utilizing Weaver or Picatinny platforms — adds only 2.9 oz (82 g) of mass while securing 1-inch (25.4 mm) main tubes to standard rail slots with dual-screw clamping and integrated recoil crossbars.

Less suitable for: Riflescopes built with 30 mm or 34 mm main tubes, which require dedicated 30mm or 34mm rings, or rifles equipped with standard 9–11 mm or 3/8-inch rimfire dovetails, which require dedicated dovetail scope rings or rail conversion adapters.