What barrel twist rate do I need to properly stabilize the Hornady 88 Grain ELD-M bullets?

Hornady explicitly requires a minimum barrel twist rate of 1:7 or faster (such as 1:6.5) to stabilize this long 1.240-inch projectile. Standard factory .223 Remington rifles with slower 1:9 or 1:12 twists will not stabilize the 88-grain bullet, leading to tumbling and severe inaccuracy.

Can I use these 88 Grain ELD-Match bullets in standard AR-15 magazine-fed builds?

Due to the extreme length of the 88-grain projectile, seating it to standard AR-15 magazine constraints (2.260 inches COAL) pushes the bearing surface deep into the powder column and restricts case capacity. These bullets are far better suited for dedicated bolt-action rifles, single-load setups, or custom cartridges like .224 Valkyrie and .22 Creedmoor.

Are these Hornady ELD-M bullets suitable for medium or large game hunting in the Australian bush?

No, Hornady classifies the ELD-Match line strictly for target shooting and long-range precision competition. The thin match jacket is not designed for controlled expansion on medium or large game, so hunters should look to dedicated game projectiles like Hornady ELD-X or CX lines instead.

What reloading press setup or accessories pair well for reloading these match bullets?

To reload these precision bullets efficiently, pairing your dies with a quality single stage press like the Lee Precision 90045 Reloader Single Stage Press and precision adjustments such as the Hornady Lock-N-Load Quick Change Die Bushing 2 Pack ensures consistent seating depths and concentricity for match-grade accuracy.

Match Bullets - Hornady 22834

The Hornady .224 88 Grain ELD-M (Extremely Low Drag Match) bullet is a component reloading projectile engineered to maximise aerodynamic efficiency and downrange accuracy in fast-twist .22-calibre rifles. Built for long-range target work, this projectile pairs a heavy 88-grain profile with Hornady's Heat Shield tip, which resists in-flight frictional heating to maintain meplat integrity over extended trajectories. When fired through appropriate fast-twist barrels, it retains supersonic velocity and tight dispersion well past 365 to 914 metres (400 to 1,000+ yards).

Heat Shield Polymer Tip: Resists aerodynamic heating to prevent tip deformation in flight, maintaining a consistent ballistic coefficient over long-range trajectories.
Aerodynamic Boat-Tail Design: Incorporates a secant ogive and optimised boat tail to yield a Doppler-radar-verified G1 ballistic coefficient of 0.545 and G7 ballistic coefficient of 0.274.
AMP Bullet Jackets: Features Hornady Advanced Manufacturing Process jackets over a swaged lead core, ensuring virtually zero wall thickness variation and uniform concentricity.
Component Packaging: Supplied as a 100-pack box of unprimed reloading projectiles for precision handloaders.

Specifications

Calibre: .224 inches (22 Caliber)
Bullet Weight: 88 grains (approx. 5.70 grams)
Overall Bullet Length: 1.240 to 1.245 inches
Sectional Density: 0.251
Ballistic Coefficients: 0.545 (G1), 0.274 (G7)
Minimum Barrel Twist Rate: 1:7" or faster
Quantity: 100 projectiles per box

Who is the Hornady .224 88 Grain ELD Match Bullets 100 Pack for?

Long-range precision target shooters — Requires a high-efficiency centrefire reloading match bullet capable of holding supersonic speed past 914 metres (1,000 yards), delivered via an 88-grain weight and a radar-verified 0.545 G1 ballistic coefficient (0.274 G7).
PRS and F-Class match competitors — Demands extreme wind deflection resistance from an extended-range projectile in fast-twist bolt-action cartridges like .22 Creedmoor, .224 Valkyrie, or custom fast-twist .223 Rem that feature a minimum 1:7" twist rate barrel.

Less suitable for: Rifles featuring barrel twist rates slower than 1:7" (such as standard 1:9" or 1:12" .223 Rem barrels) which cannot stabilise the 1.240-inch length and require lighter 55–75 grain match bullets; AR-15 platforms restricted to standard 2.260-inch magazine lengths where this projectile deeply impinges on powder capacity; and medium or large game hunting where thin-jacketed target bullets lack controlled terminal expansion, calling for dedicated controlled-expansion hunting projectiles instead.

SKU	HN42779LP
Model #	22834
Brand	Hornady
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Hornady 2265 Varmint Bullet 55 Grain Spire Point 1

$41.95

Hornady 2266 224 Caliber Bullets 55 Grain Spire Po

$41.95

Hornady 2266b Reloading Bullets 55 Grain Sp Cannel

$1,357.95

Hornady 22671 Bullets 224 55 Grain Fmj-Bt 500 Pack

$139.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Hornady 22834 Eld-M Match Bullets .224 88 Grain 100 Pack

Secure Payment Methods