What rifle barrel twist rate is required to properly stabilize the Hornady 110 Grain ELD-X bullets?

These 110 grain projectiles require a minimum rifling twist rate of 1:10 inches or faster to achieve proper stabilization. Legacy rifles featuring slower twist rates, such as 1:12 or 1:14 inches, will fail to stabilize this high ballistic coefficient projectile and should instead use lighter-weight flat-base or shorter spitzer bullets.

How does the ELD-X bullet perform across different engagement distances when hunting medium game?

At conventional velocities within 400 yards, the bullet rapidly expands while retaining 50% to 60% of its weight for deep penetration. At extended ranges past 400 yards where velocity drops, the Heat Shield tip initiates controlled expansion to achieve an impressive 85% to 90% weight retention.

Do I need a firearms licence to purchase these reloading projectiles in Australia?

Yes. While these component bullets do not require electrical certifications or 240V mains power, the sale, possession, and shipping of reloading projectiles in Australia are strictly governed by state and territory firearms legislation. Depending on your state, you may be required to present a valid Australian Firearms Licence prior to completing your purchase.

Which game weight categories are recommended for the Hornady .257 110 grain ELD-X?

This bullet is explicitly rated for medium-sized game weighing between 50 lbs and 300 lbs, such as fallow deer, pigs, and wild dogs. For game weighing more than 300 lbs or dangerous large species, Hornady recommends stepping up to heavier calibres or bonded and solid monolithic hunting bullets.

25 Cal Bullets - Hornady 25418

The Hornady 25 Cal .257 110 gr ELD-X (Extremely Low Drag – eXpanding) projectile is a component bullet engineered for handloaders seeking match-grade aerodynamic efficiency and controlled terminal performance on medium game. Featuring a 110-grain weight and a 0.257-inch diameter, this polymer-tipped boat tail bullet is designed for cartridges such as the .25-06 Remington, .257 Roberts, and .257 Weatherby Magnum. Its aerodynamic profile produces a G1 ballistic coefficient of 0.465 and a G7 ballistic coefficient of 0.234, paired with a sectional density of 0.238. Packaged in boxes of 100 inert projectiles, it requires a rifle barrel with a minimum rifling twist rate of 1:10" for flight stabilization.

Key Features

Heat Shield Tip: Constructed from heat-resistant polymer that resists aerodynamic friction melting, maintaining tip integrity and consistent ballistic coefficients over extended flight paths.
Terminal Velocity Performance: Retains 50% to 60% of bullet weight at conventional impact velocities up to 400 yards (approximately 365 m), and increases retention to 85% to 90% at velocities past 400 yards as the tip drives controlled expansion.
AMP Bullet Jacket: Built with an Advanced Manufacturing Process jacket providing near-zero wall thickness runout, combined with a secant ogive and boat tail base to maximize aerodynamic efficiency.
InterLock Retention System: Utilizes a mechanical InterLock ring and a thick jacket shank to mechanically lock the lead core to the jacket, preventing core-jacket separation on high-velocity impacts.

Specifications

Brand: Hornady
Item Number: 25418
Calibre / Bullet Diameter: .25 Calibre / 0.257 in (6.53 mm)
Bullet Weight: 110 grains (approx. 7.13 g)
Bullet Profile: Polymer-tipped boat tail expanding hunting projectile
G1 Ballistic Coefficient: 0.465
G7 Ballistic Coefficient: 0.234
Sectional Density: 0.238
Minimum Twist Rate: 1:10"
Box Quantity: 100 projectiles
Intended Game Weight Class: 50 lbs to 300 lbs (approx. 23 kg to 136 kg)

Who is the Hornady .257 110 Grain ELD-X Bullets 100 Pack for?

Handloaders targeting medium game weighing between 50 lbs and 300 lbs — delivers controlled mushrooming and weight retention across varied ranges, utilizing a 110-grain design that retains 50% to 60% weight inside 400 yards and 85% to 90% weight retention past 400 yards.
Hunters shooting .25 calibre rifles requiring a minimum 1:10" twist rate — leverages a 0.465 G1 ballistic coefficient and a 0.257-inch diameter boat tail profile to maintain high aerodynamic stability in barrels optimized for 1:10" rifling.

Less suitable for: Game weighing more than 300 lbs (approx. 136 kg), which require heavier calibres or bonded/solid monolithic hunting bullets; or rifles with rifling twist rates slower than 1:10", which require lighter-weight flat-base or shorter spitzer bullets for stabilization.

SKU	HN42800LP
Model #	25418
Brand	Hornady
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Hornady 25412 Eld-Vt Bullets 25 Cal 95 Grain 100 P

$94.95

Hornady 2552 Interlock Bullets .257 Cal 117 Gr Bts

$75.95

Hornady 25417 Eld-X Bullets 257 Cal 128 Grain 100

$102.95

Hornady 2561 Match Bullets .257 Cal 134 Grain 100

$94.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Hornady 25418 Eld-X Bullets 25 Cal 110 Grain 100 Pack

Secure Payment Methods