Hornady 380062 Case Neck Brush 17 Caliber Bronze Wire 8 32 Thread
Secure Payment Methods
Calculate Shipping
The Hornady 17 Cal. Case Neck Brush (Model: 380062) is a dedicated case preparation tool designed for internal neck cleaning and lubrication on sub-calibre rifle brass. Sized specifically for nominal .17 calibre case mouths (measuring approximately 0.172 inches in bullet diameter), it features spiral-wound bronze wire bristles that scrub out unburnt powder residue and carbon deposits following firing. The brush is also utilized during reloading to distribute dry neck lubricants, such as mica or graphite, across the internal neck surface to reduce friction during bullet seating and expander ball travel. It operates as an unpowered, passive consumable attachment suited for manual handles or motorized case prep centres.
- Sub-Calibre Bore Sizing: Engineered specifically for .17 calibre bottleneck rifle cartridge necks, delivering full internal bristle-to-wall surface contact to clear fouling.
- Spiral-Wound Bronze Bristles: Constructed with non-marring bronze wire to effectively dislodge hardened residue without eroding or scratching interior brass surfaces.
- Dry Lubricant Distribution: Sweeps dry powder lubricants throughout the inside of the neck to decrease expanding resistance on sizing dies.
- Universal 8-32 Male Thread: Directly integrates with standard 8-32 female receiver threads, including the Hornady Universal Accessory Handle, Case Prep Duo, Case Prep Trio, and Power Case Prep Center.
Specifications
- Brand: Hornady Manufacturing Company
- Model Number (MPN): 380062
- Calibre Compatibility: .17 calibre bottleneck rifle cartridges (including .17 Hornet, .17 Remington, .17 Fireball)
- Mounting Interface: Standard 8-32 thread
- Bristle Material: Spiral-wound bronze wire
- Power Requirement: 0W (passive mechanical attachment)
Who is the Hornady 17 Cal. Case Neck Brush for?
- Precision Reloaders — requires an internal brush tailored to nominal .17 calibre case necks to remove baked-on powder fouling and apply dry neck lubricant without causing case deformation on .17 Hornet, .17 Remington, and .17 Fireball brass.
- Australian Varmint Shooters — relies on standard 8-32 thread compatibility to run this 17 caliber case neck brush on motorized prep centers or hand tool handles when bulk-prepping small-bore brass for rabbit and fox management.
Less suitable for: Reloading cartridge cases with bore diameters larger than nominal .17 calibre (such as .22 calibre / 0.224-inch or 6mm / 0.243-inch), where undersized bristles fail to make contact with the neck wall, requiring a dedicated .22 calibre or larger case neck brush; reloaders working with sub-.17 calibres where oversized bristles risk bending and crushing the neck; or tool setups utilizing non-standard 8-36 or 5/16-27 threads without a thread adapter.
| SKU | HN42855LP |
| Model # | 380062 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |