The Hornady Shellholder #42 is a precision-machined steel reloading accessory engineered specifically for the .405 Winchester cartridge. Designed to fit standard universal "snap-in" ram slots, this heat-treated press accessory secures cartridge cases by the rim during sizing, depriming, expanding, seating, crimping, and case-trimming operations. It incorporates a wide-mouth opening with a radius-contoured entry edge to allow smooth, bind-free sliding insertion and extraction while resisting rim slippage and mechanical wear under heavy case-forming pressures.

Key Features

  • Dedicated Calibre Geometry: Engineered to match the exact rim dimensions of the .405 Winchester cartridge (nominal 0.543 in / 13.8 mm rim diameter and 0.063 in rim thickness) for firm, non-slip case retention.
  • Universal Press Compatibility: Features a standard snap-in groove interface compatible with Hornady single-stage and turret presses, as well as universal single-stage presses from RCBS, Lee, Lyman, and Redding.
  • Radius-Contoured Opening: Machined with a wide entry mouth and rounded edges to enable rapid, bind-free case insertion and extraction.
  • Heat-Treated Solid Steel: Hardened to resist burring, rim slippage, and structural deformation under heavy sizing and extraction forces.
  • Bench Tool Integration: Fully compatible with Hornady Hand-Held Priming Tools and the Hornady Cam-Lock Case Trimmer.

Specifications

  • Brand: Hornady Manufacturing
  • Model / MPN: 390582
  • Shellholder Number: #42
  • Calibre Fitment: .405 Winchester
  • Material: Heat-treated solid steel
  • Packaged Weight: 0.044 lbs (~20 g)
  • Packaged Dimensions: 3.20" L × 1.85" W × 0.80" H (8.1 × 4.7 × 2.0 cm)
  • Capacity: Single case per stroke
  • Power Requirements: None (manual mechanical tooling)

Who is the Hornady Shellholder #42 - 405 Win for?

  • Handloaders reloading .405 Winchester ammunition for vintage or lever-action rifles — requires dedicated retention for the nominal 0.543-inch (13.8 mm) rim profile of .405 Winchester brass, allowing this 0.044 lbs reloading press shellholder to hold cases firmly during full-length resizing and bullet seating.
  • Reloaders utilizing standard universal single-stage or turret presses — fits the industry-standard grooved ram mount with a compact 0.044 lbs steel shellholder, delivering precise alignment for .405 Winchester cases without requiring proprietary shell-holder mounting systems.

Less suitable for: High-volume reloaders operating multi-station progressive presses or proprietary priming setups; multi-station progressive reloading machines require dedicated rotating multi-calibre shellplates, while systems with non-standard priming rams require proprietary priming jaws or flat-bottom shellholder adapters.

SKU HN43075LP
Model # 390582
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying