The Hornady Cam-Lock Bullet Puller Collet #4 (.257 / .264 Caliber) is a machined steel reloading accessory designed for the clean disassembly of rifle cartridges. Engineered to install directly into the Hornady Cam-Lock Bullet Puller (item #050095), which mounts to reloading presses with standard 7/8"-14 die threads, this collet functions like a lathe draw collet. When the puller's cam handle is depressed, the collet applies uniform circumferential friction around the projectile shank, enabling reloaders to lower the press ram and extract bullets without damaging the ogive, tip, or base, and without spilling powder onto the bench.

Key Features

  • Draw-Collet Clamping: Uses a mechanical draw-collet mechanism inside the press-mounted die body to grip the projectile securely and evenly.
  • Component Preservation: Eliminates projectile tip deformation and ogive damage typically caused by kinetic hammer pullers, allowing both the projectile and powder to be salvaged.
  • Calibre-Specific Machining: Precision-engineered exclusively to clamp rifle bullets measuring between .257 in (approx. 6.53 mm) and .264 in (approx. 6.70 mm) in nominal diameter.
  • Durable Steel Construction: Manufactured from solid machined steel with a silver finish, delivering a compact working unit weight of approximately 23 g (0.8 oz).

Specifications

  • Model / MPN: 392157
  • Material: Machined steel
  • Unit Weight: Approximately 23 g (0.05 lb / 0.8 oz)
  • Packaging Dimensions: Approximately 9.5 cm × 4.7 cm × 1.9 cm (3.75 in × 1.85 in × 0.75 in)
  • Nominal Bullet Diameter Range: .257 in (approx. 6.53 mm) to .264 in (approx. 6.70 mm)
  • Mounting Compatibility: Requires the Hornady Cam-Lock Bullet Puller (#050095) mounted to standard 7/8"-14 die thread presses
  • Power Requirements: Manual / mechanical operation

Who is the Hornady Bullet Puller Collet #04 25/26 Cal for?

  • Handloaders working with 6.5mm Creedmoor and 6.5 PRC cartridges — requiring a reloading press bullet puller collet dimensioned specifically for projectiles with a .257 in to .264 in nominal bullet diameter, ensuring secure extraction without crushing or deforming jacketed rifle projectiles.
  • Reloaders correcting load workups and improperly seated rifle ammunition — needing a dedicated press-mounted tool weighing just 23 g that interfaces with 7/8"-14 die threads via the cam-lock body to salvage components cleanly from .25-caliber and 6.5mm rounds.

Less suitable for: Handloaders disassembling projectiles smaller than .257 in or larger than .264 in, which require a different sized caliber-specific collet; reloaders pulling cast lead bullets, which will be swaged or gouged by the steel clamping teeth; or users working with short pistol cartridges, which lack the exposed shank length required for press-mounted collets and are better served by an inertia-style kinetic hammer puller.

SKU HN43093LP
Model # 392157
Brand Hornady
Shipping Weight 1.0000kg

What our Customers are Saying