Hornady 392158 Bullet Puller Collet 27 Caliber 277 Reloading Tool
Secure Payment Methods
Calculate Shipping
The Hornady Cam-Lock™ Bullet Puller Collet #5 (.27 Caliber, model 392158) is a dedicated reloading tool component engineered to disassemble loaded rifle cartridges cleanly and rapidly. Designed specifically to fit the Hornady Cam-Lock™ Bullet Puller die body (Hornady Item #050095), this machined steel collet installs in standard reloading presses featuring 7/8"-14 die threads. When the press ram raises a completed cartridge into the die, operating the cam lever clamps the collet firmly around the projectile's bearing surface. Lowering the press ram draws the bullet cleanly from the cartridge neck, leaving the powder charge upright in the case for recovery and preventing deformation to delicate polymer tips, soft points, and bullet ogives.
Key Features
- Calibre-Specific Clamping: Engineered to match the exact bearing surface diameter of .277-inch projectiles, preventing bullet deformation during disassembly.
- Component Preservation: Unlike inertia impact pullers, collet-based camming eliminates battering against soft lead or polymer ballistic tips.
- Powder Containment: Extracts the projectile while keeping the cartridge case upright on the press ram, allowing clean, direct powder recovery.
- Standard Press Integration: Operates inside the Cam-Lock die body on any standard single-stage or turret reloading press with 7/8"-14 die threads.
Specifications
- Manufacturer Model Number: 392158
- Compatible Projectile Diameter: .277 inches (6.8mm / .27 Caliber)
- Die Thread Interface: 7/8"-14 threads (via Hornady Cam-Lock Die Body #050095)
- Cartridge Compatibility: Rifle cartridges including .270 Winchester, .270 WSM, .270 Weatherby Magnum, 6.8mm Remington SPC, .277 Wolverine, and .277 Fury
- Material: Machined cylindrical steel
- Package Weight: Approximately 0.05 kg to 0.22 kg (1.8 oz to 8 oz depending on packaging)
- Power Requirement: None (manual mechanical operation)
Who is the Hornady Bullet Puller Collet #05 27 Cal for?
- Handloaders reloading .270 caliber rifle cartridges — provides a precise mechanical grip tailored to .277-inch diameter projectiles, allowing the disassembly of rounds such as .270 Winchester, .270 WSM, and 6.8mm Remington SPC without marring delicate hunting tips.
Less suitable for: Handloaders working with projectile diameters below or above .277 inches (such as .264/6.5mm or 7mm/.284), handgun calibres with recessed wadcutters lacking an exposed bearing surface, or unjacketed soft cast lead projectiles prone to surface marring; an inertia impact puller or calibre-specific alternative collet fits these applications better.
| SKU | HN43094LP |
| Model # | 392158 |
| Brand | Hornady |
| Shipping Weight | 1.0000kg |