The KleenBore Microfiber Cleaning Cloth (MCR) is a dedicated maintenance accessory engineered for lifting and trapping carbon fouling, excess lubricants, and chemical solvents from firearm exteriors, cutlery, and workshop tools. Constructed from a woven polyester and polyamide synthetic blend, each cloth features a textured waffle weave that utilizes raised pockets to capture debris mechanically without smearing residue across metal, polymer, or wood surfaces. With a lint- and string-free build reinforced by overlock edge stitching, these cloths eliminate fibrous shedding around bolt faces, sliding assemblies, and optic mounts during routine field-strip and workbench maintenance.

Key Features

• Waffle Weave Texture: Engineered with raised surface pockets to physically trap and lift carbon build-up, solvents, and oil rather than spreading fluid across the workpiece.
• Lint-Free Fiber Construction: Prevents fibrous snagging and thread contamination on critical moving parts, slide rails, and action mechanisms.
• Reinforced Edge Stitching: Features a fully hemmed, overlock-stitched border that resists fraying and provides non-abrasive contact on blued, stainless, cerakote, and nitrided finishes.
• Chemical Compatibility: Withstands standard gun oils, CLPs, and mild cleaning degreasers across repeated maintenance cycles.
• Washable and Reusable: Retains its capillary wicking structure and absorbency over hundreds of standard laundering cycles when washed without fabric softeners or bleach.

Product Specifications

• Product Model: KleenBore MCR
• Material: Woven polyester and polyamide synthetic microfiber
• Dimensions: 16" × 16" (approx. 40.6 cm × 40.6 cm) per cloth
• Pack Quantity: 2-Pack
• Total Pack Weight: Approximately 0.3 lbs (approx. 136 g)
• Surface Compatibility: Blued, stainless steel, cerakote, nitrided metals, knife steels, and optics mounting hardware
• Power Requirements: None (manual maintenance accessory)

Who is the Kleenbore Microfiber Cleaning Cloth for?

• Precision firearm maintenance and bench cleaning — Delivers a 16" × 16" surface area with raised waffle-weave pockets that mechanically capture oil and residue, making this microfiber firearm cleaning cloth suitable for keeping actions and bench areas free of lint and particulate matter.
• Handgun and long gun exterior finishing and wipe-down — Provides a lightweight 0.3 lbs 2-pack configuration that allows users to dedicate one cloth to solvent and carbon removal while reserving the second for final protective oil application across receivers, slides, and barrels.

Less suitable for: Internal barrel and rifling maintenance that requires passing material through the bore; internal bore fouling removal requires calibre-specific cotton flannel patches, bore jags, or dedicated pull-through cleaners.