The KleenBore Super Carbon Fiber Rifle Cleaning Rod 36" .22–6.5mm is a single-piece bore maintenance tool engineered for workshop and gunsmith bench use. Built with a high-strength carbon fiber shaft, it resists taking a permanent bend under cleaning pressure and prevents marring or scratching rifling, chambers, and barrel crowns. The rod integrates an ergonomic, full-size anti-slide handle equipped with dual ball bearings, allowing attached cleaning tools to smoothly follow the barrel's rifling twist without unscrewing. Designed for precision care, it features standard female threads to accept widely available cleaning jags and bore brushes.

Key Features:

• Non-Marring Super Carbon Fiber Construction: Resists bending and chemical damage from standard bore cleaning solvents while protecting rifling and barrel crowns from abrasive wear.
• Smooth Ball-Bearing Rotation: Dual-bearing handle assembly rotates freely to follow the lands and grooves of the bore without working accessories loose.
• Single-Piece Rigid Design: Provides straight, flex-resistant pushing force for patch and brush passes along the bore length.
• Industry-Standard Interface: Accepts common brass jags, mops, and brushes using standard threading.
• Bench Storage Ready: Handle incorporates an integrated hang hole for vertical workshop storage.

Product Specifications:

• Working Shaft Length: 36 inches (approx. 91.44 cm)
• Rod Construction: 1-piece Super Carbon Fiber
• Calibre Compatibility: .22 Calibre up to 6.5mm (e.g., .22 LR, .223 Rem, .243 Win, 6mm Creedmoor, 6.5 Creedmoor, 6.5 PRC)
• Thread Fitting: #8-32 female threads
• Handle Mechanism: Free-spinning ball-bearing assembly
• Power Requirements: Manual operation (0W / Non-powered)

Who is the Kleenbore Super Carbon Fiber Rifle Cleaning Rod 36" .22-6.5mm for?

• Precision centerfire rifle shooters — Requires a non-marring carbon fiber cleaning rod sized for bores from .22 calibre to 6.5mm with #8-32 female threads to safely clean rifling on platforms such as .223 Rem and 6.5 Creedmoor.
• Benchrest shooters and hunters — Needs a rigid 36-inch working shaft length to clear actions and bore guides on target and hunting rifle barrels measuring up to 26 to 28 inches in a bench environment.

Less suitable for: Rifle barrels exceeding 28 to 30 inches which require a longer 44-inch working length rod, calibres larger than 6.5mm which require a dedicated .270-and-up (.30 calibre) rod to prevent excessive flex, and sub-.22 bores requiring a dedicated .17 to .20 calibre rod.