Are these feeder tubes compatible with progressive presses other than the Pro 1000 and Load-Master?

Yes, while designed primarily for the Lee Pro 1000 and Load-Master progressive presses, these tubes also feature a native fit for the Lee Universal Case Feeder and Case Collator assemblies. They can additionally be utilised on Lee APP and Six Pack Pro setups when equipped with standard tube feeder adapters.

How many cases does each tube hold and can I use them for large rifle calibres?

Each tube holds approximately 20 to 25 handgun cases depending on the specific calibre, such as standard 9mm or .38 Special. However, they are not suitable for large, long, or belted magnum rifle cartridges like .30-06 or .300 Win Mag, as these exceed the internal diameter and feeding geometry and must be fed manually.

Do these tubes require any electrical compliance or special care in Australian workshop environments?

No electrical compliance such as SAA or RCM certification is required because the 90661 is a 100% mechanical, gravity-fed accessory with no electrical components. To ensure longevity, it is recommended to store and operate them in standard indoor workshop or bench conditions to prevent any potential polymer brittleness.

How do these tubes integrate with the Lee Case Collator during reloading sessions?

The tubes are designed to interface seamlessly with the Lee Case Collator (SKU: 90667), allowing you to rapidly shake and funnel-fill up to 4 tubes simultaneously. Pre-filling these 7 clear rigid polymer tubes before your session drastically minimises downtime and lets you visually monitor remaining brass levels at a glance.

Case Feeder Tubes - Lee Precision 90661

The Lee Precision 90661 Extra Case Feeder Tubes are transparent extruded polymer drop tubes designed to expand reloading capacity and streamline brass feeding on progressive metallic cartridge reloading presses. Operating entirely via gravity without electrical requirements, these tubes allow handloaders to stage unprimed or primed cases in advance, significantly reducing interruption during high-volume sessions. They function as direct OEM replacements for damaged components and integrate natively with the Lee Pro 1000, Lee Load-Master, Lee APP, Six Pack Pro, and the Lee Universal Case Feeder / Case Collator assemblies.

Key Features

Continuous Progressive Loading: Enables pre-filling multiple tubes prior to a reloading session, minimising press downtime caused by manual single-case loading.
Transparent Monitoring: Clear rigid polymer build allows visual monitoring of remaining brass levels at a glance.
Collator Integration: Seamlessly interfaces with the Lee Case Collator assembly to allow simultaneous funnel filling of up to 4 tubes.
Broad Calibre Versatility: Direct fit for standard handgun and small rifle cartridges, including 9mm Luger, .38 Special, .357 Magnum, .40 S&W, .45 ACP, and .223 Remington.

Product Specifications

Product Type: Progressive press case feeder tubes
Manufacturer Part Number: 90661
Quantity Supplied: 7 clear feeder tubes
Material: Rigid transparent extruded polymer
Operating Mechanism: 100% mechanical / gravity-fed
Capacity: Approximately 20 to 25 handgun cases per tube (e.g., standard 9mm Luger or .38 Special)
Press Compatibility: Lee Pro 1000, Lee Load-Master, Lee APP, Six Pack Pro (with standard tube feeder adapters), and Lee Universal Case Feeder / Case Collator

Who is the Lee Precision Extra Case Feeder Tubes pack for?

High-volume handgun and small rifle reloaders — provides 7 clear feeder tubes per package to stage large quantities of brass in advance, holding approximately 20 to 25 handgun cases per tube to maintain continuous operation across long reloading runs.
IPSC competitors reloading on Lee progressive presses — reduces cycle interruptions on the bench by leveraging this progressive press case feeder tube pack to hold batches of 20 to 25 cases per tube for high-frequency training ammunition preparation.

Less suitable for: Reloaders working with large, long, or belted magnum rifle cartridges that exceed the internal tube diameter and require manual single-case feeding, or those requiring fully automated continuous operation without manual tube pre-filling, who are better served by a motorized rotary case feeder.

SKU	LE102208LP
Model #	90661
Brand	Lee Precision
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

Don't pay $488.95 $414.95 15.13% OFF

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Lee Precision 90685 Breech Lock Hand Press Portabl

$148.95

Lee Precision 90304 Classic Turret Press Kit 4-Hol

Don't pay $770.95 $654.95 15.05% OFF

Redding 07900 Imperial Dry Neck Lube Application M

$31.95

Redding 11900 E-Z Feed Shellholder Set 6 Pack Stee

$156.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Lee Precision 90661 Case Feeder Tubes 7-Pack Reloading

Secure Payment Methods