What specific bullet diameter and length range is the Lee Precision 90887 designed to handle?

This model is engineered for bullet diameters from .355 to .365 inches and lengths ranging strictly from 0.460 inches up to 0.600 inches. This makes it ideal for standard 9mm Luger, .380 Auto, and .357 SIG projectiles.

Which reloading presses are compatible with the Lee 90887 Bullet Feed Die & Fingers?

It is specifically designed for legacy Lee progressive presses including the Pro 1000 manufactured after 1992 and the Load-Master. For presses utilizing standard threaded setups like the Auto Breech Lock Pro, dedicated bushings or lock rings are required.

What happens if my bullets fall outside the 0.460 to 0.600 inch length window?

If your projectiles are shorter than 0.460 inches, such as lightweight 90-95 grain .380 ACP bullets, you will need Lee model 90893. Conversely, bullets longer than 0.600 inches, like heavy 147 grain 9mm projectiles, require Lee model 90895.

Does this mechanical reloading accessory require any electrical compliance or SAA/RCM certification in Australia?

No, the Lee 90887 is a 100% mechanical reloading press accessory that requires zero electrical input. Therefore, Australian 240V mains power specifications, plugs, and SAA/RCM regulatory marks do not apply.

What types of bullet profiles work best with these feed fingers?

The unit is optimized primarily for jacketed or lead round-nose flat-base bullets to ensure smooth feeding. Wadcutters, semi-wadcutters, or heavily rebated boat-tail bullets may experience feeding failures, tipping, or alignment issues in the die.

How many bullets can the feed system hold at once when paired with this die?

The die feeds seamlessly from standard 25-bullet capacity feed tubes included in legacy systems, or up to approximately 100 bullets when you pair your setup with the optional Lee Multi-Tube Feeder.

Bullet Feed Die - Lee Precision 90887

The Lee Precision 90887 Bullet Feed Die & Fingers is a dedicated progressive reloading accessory designed to automatically position and seat projectiles directly into flared cartridge cases. Built for legacy progressive setups including the Lee Pro 1000 (post-1992 models with carrier attachment lugs) and Lee Load-Master presses, this 100% mechanical die eliminates manual bullet placement to increase reloading output by 50% to 100%. It serves as an integrated replacement or calibre-conversion component for the Lee Bullet Feed Kit, operating with standard 25-capacity feed tubes or multi-tube configurations without requiring electrical power.

Automated Bullet Placement: Holds, aligns, and drops projectiles straight into the cartridge mouth at the seating station, improving consistency and cycle speed.
Calibre Conversion Component: Adapts existing Lee feeder mechanisms to run medium-length 9mm to .365 caliber projectiles without replacing the complete feeder assembly.
Mechanical Operation: Functions entirely via press stroke mechanics without motors, wiring, or electrical inputs.
Magazine Flexibility: Feeds projectiles from standard 25-bullet single feed tubes or up to approximately 100 rounds when paired with an optional multi-tube adapter.

Specifications

Manufacturer Part Number (MPN): 90887
Compatible Calibre Range: .355″ to .365″ bullet diameter (9mm Luger, .380 Auto, .38 Super, 9x18mm Makarov, .357 SIG)
Compatible Bullet Length Range: 0.460″ to 0.600″ (11.68 mm to 15.24 mm)
Supported Bullet Profiles: Jacketed or lead round-nose flat-base bullets
Press Compatibility: Lee Pro 1000 (post-1992), Lee Load-Master (requires model-specific setup on Pro 4000/Auto Breech Lock Pro)
Packaging Dimensions: Approximately 15 × 5 × 3 cm
Shipping Weight: Approximately 50 g to 90 g
Power Requirement: None (mechanical)

Who is the Lee Precision 90887 Bullet Feed Die & Fingers for?

Progressive reloading press operators loading 9mm Luger, .380 Auto, or .357 SIG — Automatically feeds and aligns projectiles with a diameter of .355 to .365 inches (9mm to .365 caliber) into the case mouth, removing manual handling on compatible progressive presses.
Reloaders converting an existing Lee Bullet Feed Kit to medium-length 9mm projectiles — Adapts an existing reloading press bullet feed die assembly to handle projectile lengths strictly within the 0.460 to 0.600 inch (11.68 mm to 15.24 mm) window, typical of standard 115-grain to 124-grain round-nose profiles.

Less suitable for: Projectiles outside the 0.460″ to 0.600″ range; bullets shorter than 0.460 inches require a dedicated short-bullet feed die (such as model 90893), while bullets exceeding 0.600 inches in length require an extended-length bullet feed die (such as model 90895).

SKU	LE102206LP
Model #	90887
Brand	Lee Precision
Shipping Weight	0.2000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Hornady Lock-n-load Press Conversion Kit #044099

$52.95

Rcbs Reloading Equipment Vernier Micrometer One Pi

$112.95

Lyman Ly-Bwht Bench Wrench Reloading Tool Multi-Op

$29.95

Lyman Perfect Mould Double Cavity Semi Wadcutter R

$268.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Lee Precision 90887 Bullet Feed Die 9mm To .365 Caliber

Secure Payment Methods