The Lee Precision 90895 Bullet Feeder Kit For 9mm To .365 Caliber Reloading is a fully mechanical press accessory designed to automate projectile placement on progressive reloading setups. Operating without electrical power, this kit aligns and feeds bullets directly into the mouth of the bullet seating die with each press stroke, increasing reloading throughput by an estimated 50% to 100% while preventing tilted projectiles.

Key Features

• Mechanical Feeding Action: Utilises an actuator rod and feed fingers to automatically place projectiles into the seating die, eliminating manual hand-placement.
• Tube-Fed Supply: Includes a clear feed tube holding approximately 25 bullets per cycle.
• Consistent Bullet Alignment: Positions projectiles squarely into the cartridge case mouth to minimise seating defects and bullet tilt.
• Broad Press Compatibility: Mounts natively to the Lee Load-Master and post-1992 Lee Pro 1000 progressive presses, with compatibility for the Auto Breech Lock Pro / Pro 4000 using an additional bushing and lock ring.

Specifications

• Product SKU: 90895
• Calibre / Bullet Diameter Range: .355" (9mm Luger / .380 ACP) to .365" (e.g., 9x18mm Makarov)
• Compatible Bullet Length: 0.60 inches to 0.75 inches (15.24 mm to 19.05 mm)
• Single-Tube Capacity: 25 bullets
• Power Requirements: None (100% mechanical linkage/gravity feed)
• Dimensions: Approximately 19 × 5 × 3 inches (48.3 × 12.7 × 7.6 cm)
• Item Weight: Approximately 0.11 kg (packaged weight 0.33 kg)

Who is the Lee Precision Bullet Feeder Kit for 9mm to .365 Caliber for?

• Australian IPSC and pistol club shooters reloading 9mm Luger ammunition in high volumes — Increases progressive press output by feeding 25 bullets per tube directly into the seating die without manual placement on .355" diameter cases.
• SSAA members reloading mid-to-heavy 9mm and .365 caliber projectiles on progressive presses — Automatically aligns and seats projectiles with an overall bullet length between 0.60 inches and 0.75 inches (approx. 15.24 mm to 19.05 mm), covering typical 124 gr to 147 gr bullet profiles.

Less suitable for: Reloaders seating bullets with an overall length under 0.60 inches (such as lightweight 90 gr to 115 gr projectiles), who require a short-length bullet feed kit model tuned for .46" to .60" or under .46" lengths; reloaders running projectiles outside the .355" to .365" diameter range, who require a dedicated caliber-specific feeder kit; or owners of pre-1992 Pro 1000 presses lacking the carrier mounting lug, who need a modern carrier assembly upgrade.