Is the Lyman Mould Rebuild Kit compatible with all Lyman single cavity moulds, including older or vintage models?

No, this kit (MPN 2680100) is specifically designed for Lyman's modern Large Single Cavity (LSC) bullet moulds. It is not compatible with older, smaller-block Lyman or Ideal vintage moulds.

What specific components are included in this rebuild kit, and how do they help restore my bullet mould?

The kit includes a durable 7-gauge steel sprue cutter, a spring washer to maintain correct tension, and a complete screw set (cutter screw, handle screws, and a #10-32 set screw). These factory-original parts allow you to completely rebuild the mechanical interface of your single-cavity mould to factory-new tolerances, addressing wear from thermal cycles and friction.

Are there any specific Australian electrical or safety compliance requirements for this Lyman Mould Rebuild Kit?

No, this is a purely mechanical, non-powered hand-tool accessory. It does not require 240V electrical compatibility, does not feature an Australian plug, and is exempt from Australian SAA or RCM electrical safety certifications.

Why should I choose to use this rebuild kit instead of purchasing a brand new bullet mould?

This kit offers a cost-effective solution to restore worn or damaged moving parts on your existing Lyman single-cavity mould, such as the sprue cutter or screws. It allows you to maintain your precision-machined iron mould block, which is particularly valuable in Australia where importing heavy, complete mould blocks can be costly and subject to supply chain delays.

Who is this Lyman Mould Rebuild Kit primarily designed for, and what skill level is required for installation?

This kit is an essential maintenance package for DIY ammunition reloaders and bullet casters who want to restore their existing Lyman Large Single Cavity bullet moulds. Installation involves replacing existing components and is straightforward for anyone familiar with basic mould disassembly and reassembly.

Bullet Mould Rebuild Kit - Lyman LY-MRKSC

The Lyman Mould Rebuild Kit for Large Single Cavity Bullet Moulds (Manufacturer Part Number: 2680100, SKU: LY-MRKSC) is a factory-original hardware package designed to restore worn or damaged moving parts on single-cavity bullet casting moulds. Bullet casting involves high thermal cycles and repetitive mechanical friction, which naturally degrades small components over time. Rather than replacing an entire precision-machined iron mould block when a screw strips or a sprue plate warps, this kit allows users to completely rebuild the mechanical interface of their single-cavity mould to factory-new tolerances. This kit is specifically designed for modern Lyman Large Single Cavity (LSC) bullet moulds and is not compatible with older, smaller-block Lyman or Ideal vintage moulds.

Key Features:

Thicker Sprue Cutter: Made of durable 7-gauge (approximately 0.18 inches or 4.5mm) steel to cleanly shear off excess lead at the base of the cast bullet.
Spring Washer: Maintains the correct tension between the sprue plate and the mould block for consistent casting results.
Complete Screw Set: Includes the essential cutter screw, handle screws, and a #10-32 set screw to fully secure the assembly.
Factory-Original Quality: Ensures precise fitment and restores original mechanical tolerances without requiring custom modifications.
Mechanical Design: A fully manual hand-tool accessory that requires no power source or electrical safety certifications.

Product Specifications:

Brand: Lyman
Manufacturer Part Number (MPN): 2680100
Retailer Code: LY-MRKSC
Weight: Approximately 2 ounces (56.7 grams)
Sprue Cutter Thickness: 7-gauge (approx. 0.18" / 4.5mm)
Set Screw Thread: #10-32
Power Requirements: None (fully mechanical)
Compatibility: Modern Lyman Large Single Cavity (LSC) moulds only (not compatible with vintage Lyman/Ideal moulds)

Who It Is For:

This rebuild kit is specifically designed for Australian sporting shooters, hunters, and historical re-enactors who cast their own custom lead projectiles, including large-calibre rifle rounds, shotgun slugs, or black-powder round balls. Because importing heavy, complete iron mould blocks into Australia can be costly and subject to international supply chain delays, this kit provides a practical, localized solution. It is ideal for domestic reloading enthusiasts who want to maintain their existing casting equipment, extend the service life of their Lyman moulds, and avoid the expense of purchasing entirely new mould blocks.

SKU	LY38488LP
Model #	LY-MRKSC
Brand	Lyman
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Butler Creek Fast Flip Open Scope Cover 01 Eyepiec

$28.95

Primos Pull Up Rope Nylon With Clasps Snap Hooks E

$20.95

Recommended Products

Lee Precision Bullet Mold .430 Diameter 310 Grain

$82.95

Lee Precision Double Cavity Bullet Mold .435 Diame

$82.95

Lyman Ly-M40674 Bullet Mould .378 335gr Round Nose

$291.95

Hornady 7mm Cal Gas Checks 1000 Pack 7060

Don't pay $146.95 $124.95 14.97% OFF

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Lyman Ly-Mrksc Mould Rebuild Kit Large Single Cavity Bullet Casting

Secure Payment Methods