Will my 1911-A1 pistol fit securely inside the MTM 803R case?

Yes, the MTM 803R is specifically designed to accommodate standard Colt .45 calibre 1911-A1 handguns, provided they fit within the 9.0 inches L by 5.6 inches W internal dimensions. The high-density egg-crate foam on both the top and bottom securely sandwiches the firearm to prevent lateral movement during transport. However, pistols with extended magazines exceeding 5.6 inches in height or bulky red-dot optics will not fit and require a larger model such as the MTM 807.

Can I use the MTM 803R case to transport my rifle bolts?

Yes, precision rifle shooters frequently repurpose the MTM 803R as a protective storage and transport container for removed rifle bolts. The durable high-impact polypropylene construction and convoluted foam lining protect the bolt from impact damage and grit during transit to and from the range. The compact exterior dimensions of 9.5 inches L by 6.5 inches W make it easy to slip into a larger range bag.

Does this case meet Australian legal requirements for transporting firearms?

The MTM 803R features a moulded padlock point that allows you to secure the case with a standard padlock. However, Australian state firearm regulations, such as those enforced by the NSW Firearms Registry and Victoria Police, mandate strict compliance for Category H handguns and general bolt transport. You must ensure the case is locked with an approved padlock when transporting firearms in a vehicle, and stored inside a certified steel gun safe when not in transit.

Is the MTM 803R waterproof for outdoor use in the Australian bush?

The MTM 803R features an overlapping lid lip designed to resist water intrusion, dust, and moisture during typical outdoor conditions. It provides solid splash and weather repellency for trips to the range or outback transport. Please note that it does not feature an airtight O-ring gasket and is not submersible, so it should not be exposed to standing water or heavy submersion.

Compact Handgun Case - MTM Case-Gard 803R

The MTM Case-Gard 803R Compact Handgun Case provides impact-resistant storage and transport for small firearms and firearm components. Constructed from high-impact polypropylene plastic, the case utilizes dual snap latches, a mechanical hinge, and an overlapping lid lip to shield internal contents from dust, splashes, and lateral impact. Inside, top and bottom high-density convoluted egg-crate foam cushions items to prevent shifting during transit. A molded padlock tab accommodates standard padlocks or cable locks, assisting shooters in meeting legal transport compliance for Category H handguns and detached components.

Key Features

High-Impact Polymer Construction: Built from specially formulated polypropylene plastic designed to resist physical impact.
Internal Cushioning: Egg-crate (convoluted) foam layers sandwich firearms and components to prevent internal movement and surface abrasion.
Hardware and Closure: Features a durable mechanical hinge system paired with two heavy-duty snap latches for secure closure.
Weather-Resistant Lip: Overlapping outer lid design repels dirt, moisture, and water splashes.
Integrated Security and Carry Handle: Includes an offset molded carry handle alongside a dedicated padlock tab for locking compatibility.

Specifications

Internal Dimensions: 9.0" L × 5.6" W × 2.0" D (22.8 cm × 14.2 cm × 5.0 cm)
External Dimensions: 9.5" L × 6.5" W × 2.2" D (24.2 cm × 16.6 cm × 5.6 cm)
Material: Polypropylene plastic with open-cell convoluted foam lining
Firearm Capacity: Single handgun or single rifle bolt assembly
Maximum Revolver Barrel Length: 3.0 inches (76.2 mm)
Power Requirements: None (manual mechanical design)

Who is the MTM Compact Handgun Case/1911-A1 Case/Rifle Bolt Case for?

Range Shooters Transporting 1911-A1 Pistols — Needs a dedicated compact handgun transport case that tightly fits standard GI-profile Colt .45 calibre 1911-A1 handguns within an internal length footprint of exactly 9.0 inches.
Concealed Carry Owners Storing Subcompact Pocket Pistols — Requires secure vehicle or safe storage for revolvers and subcompacts limited to a maximum barrel length of 3.0 inches (76.2 mm) or less.
Precision Rifle Shooters Transporting Removed Rifle Bolts — Benefits from an interior depth of 2.0 inches lined with convoluted foam to immobilize detached precision rifle bolts during match transit.

Less suitable for: Handguns with barrel lengths exceeding 3.0 inches or firearms with extended magazines taller than 5.6 inches; these dimensions require stepping up to a medium-to-large multi-handgun hard case or a dedicated full-sized transport case designed for 4-inch to 8-inch barrels.

SKU	MM41100LP
Model #	803R
Brand	Mtm Case-Gard
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Grovtec Gtsw40 Two Piece Barrel Band Swivel Set Fo

$43.95

Kleenbore A186n Nylon Bore Brush For 12 Gauge Shot

$10.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Allen Exo Handgun Case For Pistols Up To 9 Inches

$78.95

Tough Move Pistol Hand Gun Drone Heavy Duty Case -

Don't pay $109.95 $69.95 36.38% OFF

Mtm 4 Pistol Handgun Case - 12 Inch Black #811-40

$59.95

Magpul Daka Hard Gun Case - C35 #mag1290-blk

Don't pay $783.95 $726.00 7.39% OFF

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Mtm Case-Gard 803r Handgun Case Polypropylene Foam Lining

Secure Payment Methods