What is the maximum arrow length and capacity supported by the MTM BH-18S-41 case?

This case accommodates up to 18 broadhead-tipped hunting arrows or up to 24 target arrows with field points. It is specifically engineered to hold total arrow lengths up to 35.75 inches, measured from the tip to the nock groove, ensuring full clearance for longer setup shafts.

How do the foam inserts protect my fletchings during rough outback transit?

The case features movable notched foam padding inserts designed to firmly separate each individual shaft. This configuration prevents arrows from shifting during transport in a vehicle boot across rough Australian tracks, protecting your vanes and feathers from crushing or permanent deformation.

Is the MTM Compact Arrow Case completely waterproof for heavy bush downpours?

The BH-18S-41 utilizes a secure snap-lock latching system with dual padlock tabs that offer great dust- and splash-resistance for typical outdoor environments. However, it is not an IP67 submersible O-ring sealed case, so prolonged direct immersion or severe downpours can allow moisture to pass around the rim.

Are there any electrical compliance requirements or Australian certifications needed for this case?

No electrical standards or SAA/RCM certifications apply to this product. The MTM BH-18S-41 is an entirely unpowered, mechanical polypropylene storage case with stainless steel hinge pins, meaning local 240V mains power regulations are irrelevant.

Compact Arrow Case - MTM Case-Gard BH-18S-41

The MTM Compact Arrow Case (BH-18S-41) is a dedicated hard arrow storage case designed to organise, transport, and protect full-length hunting and target arrows. Moulded from luggage-grade polypropylene with stainless steel hinge pins, this rugged case holds shafts securely to prevent fletching damage and blade contact during vehicle transit or field carry. Built to fit arrows up to 35.75" (approx. 90.8 cm) in total length, it features a slimline external profile measuring 36.2" L x 7.5" W x 3.0" H (approx. 91.9 cm x 19.1 cm x 7.6 cm) in a Clear Smoke finish, making it easy to store in vehicle boots or slide into arrow pockets on soft bow bags.

Key Features

Dual Capacity Configurations: Holds up to 18 broadhead-tipped hunting arrows with blade clearance or up to 24 stacked field-point target arrows.
Fletching Protection: Moveable notched foam padding inserts keep arrow shafts separated to prevent vane deformation and feather crushing.
Transit Security: Equipped with dual snap-lock latches and integrated double padlock tabs for secure travel.
Stackable Shell: Moulded exterior ridges provide stable, non-slip stacking for workshop shelves, gear lockers, and vehicles.
Durable Construction: Made in the USA from chemical- and moisture-resistant polypropylene with mechanical hinge pins.

Product Specifications

Category: Hard Arrow Storage Case
Model Code: BH-18S-41
Colour: Clear Smoke (-41)
External Dimensions: 36.2" L x 7.5" W x 3.0" H (91.9 cm x 19.1 cm x 7.6 cm)
Maximum Arrow Length: 35.75" (90.8 cm) tip to nock groove
Capacity: 18 broadhead arrows or 24 target arrows
Material: Polypropylene with stainless steel hinge pins
Country of Manufacture: USA

Who is the MTM Compact Arrow Case for?

Bowhunters targeting deer, feral pigs, and goats — protects up to 18 broadhead arrows measuring up to 35.75" in length within individual notched foam slots, preventing razor-sharp hunting blades from contacting adjacent shafts during rough vehicle transport across rugged terrain.
3D competitive archers and target shooters — stores up to 24 target arrows in a slimline 36.2" L x 7.5" W x 3.0" H hard arrow storage case that preserves precise fletching alignments while fitting into compact gear lockers or sliding alongside primary equipment.

Less suitable for: Crossbow bolts under 24" (which experience excessive longitudinal movement inside a 36.2" shell and require dedicated short-bolt cases) or archery users requiring full integration of a bow and arrows in a single unified box (who require a full-size unified hard bow case).

SKU	MM41121LP
Model #	BH-18S-41
Brand	Mtm Case-Gard
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Grovtec Gtsw40 Two Piece Barrel Band Swivel Set Fo

$43.95

Kleenbore A186n Nylon Bore Brush For 12 Gauge Shot

$10.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Mtm Case-Gard Bh35-41 Arrow Case 35 Inch 48 Arrow

$102.95

Allen Al7009 Titan Broadhead Caddy Storage Box Hol

$44.95

Allen Al7036 Titan Compact Back Quiver Holds 14 Ar

$65.95

Allen Al5654 Defender Coated Hooks Wooden Plaque 1

$56.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Mtm Case-Gard Bh-18s-41 Arrow Case Fits 18 Arrows 35.75 Inches

Secure Payment Methods