Will this ammo box withstand the harsh heat and UV exposure found during extended trips in the Australian outback?

Yes, the box is constructed from high-density, scuff-resistant polypropylene formulated to resist warpage, contraction, and embrittlement under standard sporting ambient conditions. While it performs reliably in outdoor environments, it is best stored out of direct, prolonged scorching sun inside a vehicle to maintain optimal material longevity.

What is the maximum cartridge overall length (OAL) that will fit safely inside the MTM P50-44-10?

The maximum cartridge overall length supported by this model is 1.86 inches (47.2 mm). Ammunition exceeding this limit will prevent the lid from closing properly, so handloaders should verify their custom .44 Magnum or .45 Colt seated lengths before loading them into the 50-round grid.

Can I use this specific box to store thinner handgun cartridges like 9mm or .38 Special?

No, this box is specifically engineered with larger cell dimensions for large-bore revolver and handgun calibres such as .44 Mag, .45 Colt, and .41 Mag. Thinner cartridges like 9mm, .380 ACP, or .38 Special will fit far too loosely in the compartments; you should instead select dedicated models like the P50-9M or P50-38 for those calibres.

Does this plastic storage box require any electrical compliance or SAA/RCM certifications for use in Australia?

No electrical compliance or SAA/RCM certifications are required because this product is a completely passive, unpowered plastic storage accessory containing no electrical components. It does not connect to 240V mains power and is purely designed for mechanical organisation and transport.

Pistol Ammo Box - MTM P50-44-10

The MTM Pistol Ammo Box 50 Round Flip-Top (P50-44-10) is a dedicated storage and transport case designed for large-bore handgun and vintage rifle ammunition. Moulded from scuff-resistant polypropylene in solid green, it holds up to 50 rounds in an individual 5x10 grid. The box secures ammunition with a full-length mechanical hinge and a Snap-Lok clasp to prevent accidental openings in transit. Integrated stacking feet mate with grooved lids for stable placement in gun safes and range bags, while supported calibres are permanently moulded into the base alongside an included load label for recording ballistic data.

Key Features

Snap-Lok Closure: Utilises a snap-locking latch combined with a full-length mechanical hinge to protect ammunition from spilling during transport.
Stackable Design: Features moulded base feet that interlock with grooved lid recesses for secure, non-slip stacking in safes and carry bags.
Load Tracking: Includes a writable adhesive label to document powder, primer, and projectile details, complemented by calibre listings moulded into the underside of the box.
Calibre-Specific Fit: Internal cell dimensions accommodate large-diameter revolver cases up to a maximum cartridge overall length (OAL) of 1.86 inches (47.2 mm).

Product Specifications

Capacity: 50 rounds (5x10 grid)
Maximum Cartridge Overall Length (OAL): 1.86 inches (47.2 mm)
Empty Weight: Approximately 105 g
Dimensions: Approximately 140 mm (L) × 70 mm (W) × 50 mm (H)
Material: High-density polypropylene
Colour: Solid Green
Primary Calibre Compatibility: .44 Remington Magnum, .44 Special, .44 Russian, .44-40 Winchester, .45 Long Colt, .41 Remington Magnum, .41 Long Colt
Secondary Calibre Compatibility: .25-20 Win, .256 Win Mag, .310 Cadet, .35 Win S.L., .357/44 B&D TC, .38-40 Win, .45 S&W Schofield, .45 Win Mag TC, .460 Rowland

Who is the MTM 50 Round Flip-Top .44 Mag / .45 Colt Ammo Box for?

Handloaders organizing custom .44 and .45 calibre ammunition — Provides a 50-round capacity grid with a maximum cartridge overall length of 1.86 inches (47.2 mm) to keep custom loads upright, separated, and marked using the included load label.
Cowboy action shooting participants — Keeps exactly 50 rounds of .45 Long Colt, .44-40 Winchester, or .45 S&W Schofield secured in an impact-resistant handgun ammunition storage box measuring 140 mm × 70 mm × 50 mm for match transport.
Target shooters transporting revolver cartridges to the range — Adds only 105 g of empty weight to shooting kits while protecting fifty .44 Remington Magnum or .41 Magnum rounds from moving during transit.

Less suitable for: Ammunition exceeding the 1.86-inch (47.2 mm) maximum cartridge overall length (such as .460 S&W or .500 S&W Magnum), which prevents the lid from closing and requires larger magnum handgun or rifle cases; or thinner cartridges like 9mm and .357 Magnum, which fit loosely and require calibre-specific small-bore storage boxes.

SKU	MM41150LP
Model #	P50-44-10
Brand	Mtm Case-Gard
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw40 Two Piece Barrel Band Swivel Set Fo

$43.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Icu Lockable Metal Box For Icucam4 - Arm Green #ic

$98.95

Mtm Case-Gard P-100-44-16t Ammo Box 100 Round .44

$12.95

Mtm P50-45-16 Pistol Ammo Box 50 Round Clear Green

$7.95

Mtm Bmg10-40 Rifle Ammo Box 50 Bmg 10 Round Black

$16.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Mtm P50-44-10 Pistol Ammo Box 50 Round 44 Mag 45 Colt Green

Secure Payment Methods