Flugz 21 Db Hearing Protection

1. OPEN & PREP
Peel open, remove and throw away metal lid. Secure one FLUGZ earplug by inserting the lanyard post into the holder on the bottom of the cup. This will ensure it is heated evenly in the microwave.
NOTE: The metal rim on the cup is microwave safe.

2. HEATING
With only one earplug inserted in the microwave safe cup, fill the cup up to the ledge with room temperature water. Microwave uncovered on HIGH for 30 seconds.
CAUTION: DO NOT microwave the earplugs by themselves without water.

3. WARM FLUGZ
Pour the hot water out of the cup. The earplug will be wet and slightly tacky. Carefully remove the earplug and hold it by the lanyard post. Blow off the excess water before inserting into ear.
NOTE: The FLUGZ earplug material will slightly deform and lose some of its original shape when heated. This is normal.

4. INSERTING FLUGZ EARPLUG
To insert the FLUGZ earplug, reach over your head and pull up on your RIGHT ear with your LEFT hand. Open your jaw. While holding the RIGHT (RED) earplug by the lanyard post with your RIGHT hand, insert the earplug into your ear canal. Press on the lanyard post to help guide the earplug into your ear canal. Once the earplug is in your ear canal, let go of your RIGHT ear and close your jaw and IMMEDIATELY move to STEP 5. Note: Illustration shows the RIGHT ear. Orient the FLUGZ earplug as shown, with the curved portion oriented UP.

5. FORMING FLUGZ EARPLUG
Once the earplug is inserted into your ear canal, continue to press and mold to your ear lobe as shown. Once you feel the earplug is formed, hold in place for 30 seconds. Let the earplug cool in your ear for an additional 90 seconds. Note: The molded ear plug will take on the shape of your ear and will no longer have the original shape or appearance.

6. COOLING FLUGZ EARPLUG
Remove the FLUGZ earplug from your ear and let cool for an additional 5 minutes before placing back into your ear. Continue STEP 1'6 for the opposite earplug.
NOTE: If you can still see the original indentions from the unformed earplug, it may not have been formed well enough to your ear. Move on to the re-heating instructions if you feel you need to try forming the earplug again.

LANYARD INSTRUCTIONS
Press the lanyard loop directly down onto the lanyard post of the FLUGZ earplug, twisting back and forth slightly.
CLEANING INSTRUCTIONS: Your FLUGZ earplugs may become soiled with regular use. This will prevent the earplugs from creating a perfect seal in the ear. Simply use a mild soap and lukewarm water to clean soiled or dirty earplugs. Lightly pat dry with a cloth.

RE-FORMING INSTRUCTIONS
If you are no longer getting a perfect t, you can re-heat and re-form the earplugs as often as necessary. Fill the microwave safe cup up to the ledge with water and microwave uncovered for 30 seconds WITHOUT the earplugs in the cup. Using the lanyard, dip an earplug into the hot water for 10'15 seconds. This will heat and soften the outer material enough to reform to your ear. You may need to mold the material slightly if it has been pressed away from the core. Blow off the excess water and reform to your ear.