Will the RCBS 11501 6mm Rem Full Length Die Set fit my standard reloading press in Australia?

Yes, this 2-die set features the industry-standard 7/8"-14 TPI thread interface, making it fully compatible with all standard single-stage and turret reloading presses commonly used by Australian handloaders. Because it is a purely manual mechanical tool, there are no electrical requirements, 240V plugs, or SAA/RCM certifications needed for operation.

What additional components do I need to buy to start reloading 6mm Remington with this die set?

To use this die set, you will need to separately acquire a No. 3 Shell Holder (RCBS part #09203) or a No. 3 Shell Plate (RCBS part #88803) to secure the brass in your press. Additionally, you must use a high-quality case lubricant, such as RCBS Case Lube-2, during the resizing process to prevent fired brass cases from getting stuck inside the steel sizing die.

Can I use the RCBS 11501 dies for other 6mm calibres like the .243 Winchester or 6mm Creedmoor?

No, this die set is strictly calibre-specific for the 6mm Remington (originally known as the .244 Remington) bottleneck rifle cartridge and is built to SAAMI minimum specifications for that specific case. It is completely incompatible with other 6mm cartridge cases such as the .243 Winchester, 6mm Creedmoor, or 6mm ARC.

Is this full-length die set recommended if I only want to neck-size brass for a single bolt-action rifle?

No, if your primary goal is to extend brass case life and maximize accuracy specifically for a single dedicated bolt-action rifle by only neck-sizing fire-formed brass, a dedicated neck-sizing die should be used instead. This RCBS 11501 set is specifically engineered to full-length resize cases to ensure reliable chambering across any standard 6mm Remington rifle.

6mm Rem Die Set - RCBS R11501

The RCBS 6mm Rem Full Length Die Set is a precision-engineered 2-die reloading system designed to restore fired bottleneck rifle cartridges back to exact factory-specification tolerances. This set allows handloaders to reliably resize fired brass and seat new bullets with consistent accuracy. Operating on a purely manual mechanical basis, this high-durability tool set is designed to work with standard reloading presses using the industry-wide thread interface pattern.

Key Features

Full-Length Sizing: The sizer die processes the entire exterior of the fired 6mm Remington bottleneck case down to SAAMI minimum dimensions, de-primes the spent primer using an integrated Expander-Decapping Unit, and expands the inner neck diameter to accept a new bullet.
Internal Air Venting: Features an integrated venting system to safely exhaust trapped air, preventing hydraulic case denting from excess lubricant during the resizing stroke.
Consistent Bullet Seating: The included seater die features an integrated built-in roll crimper to seat the bullet to a uniform depth and secure it in place simultaneously.
Premium Steel Construction: Manufactured from heat-treated, hardened steel to withstand high-pressure mechanical sizing forces over long production lifespans.

Product Specifications

Calibre Compatibility: 6mm Remington (originally known as .244 Remington)
Thread Interface: Standard 7/8"-14 TPI (threads per inch)
Material: Heat-treated, hardened steel
Net Weight: Approximately 907g (including the protective hard plastic storage case)
Shipping Weight: Approximately 1.20 lbs to 1.25 lbs (544g to 567g)
Packaging Dimensions: Approximately 5.9" to 5.95" L x 4.5" to 4.6" W x 1.7" to 1.75" H (15 cm x 11.5 cm x 4.4 cm)
Required Accessories (Sold Separately): Requires a No. 3 Shell Holder or No. 3 Shell Plate, alongside high-quality case lubricant.

Who is the Rcbs 6mm Rem Full Length Die Set for?

Handloaders processing bottleneck cases — requires a dedicated reloading die set that threads into standard 7/8"-14 TPI presses to resize fired 6mm Remington brass back to SAAMI minimum dimensions.
Hunters and target shooters — needing reliable chambering across different firearms chambered in this calibre, which this 7/8"-14 TPI reloading die set provides by restoring fired 6mm Remington cases to factory tolerances and seating bullets to uniform depths.

Less suitable for: handloaders who intend to only neck-size fire-formed brass to extend case life for a single, dedicated bolt-action rifle, who should instead use a dedicated neck-sizing die; it is also completely incompatible with other 6mm variations such as 6mm Creedmoor, 6mm ARC, or .243 Winchester cartridge cases.

SKU	RC39171LP
Model #	R11501
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Primos Hunting Game Caller Randy Anderson Predator

$61.95

Lyman Perfect Case Trimmer Specific Pilot Reloadin

$20.95

Lyman Trius Trap Birdshooter 2 Fully Adjustable Wi

$160.95

Allen Cascade Neoprene Gun Sling With Molded Ends

$56.95

Recommended Products

Rcbs R10308 Matchmaster Die Set 204 Ruger Full Len

Don't pay $595.95 $505.95 15.10% OFF

Rcbs R11201 224 Valkyrie Die Set Full Length Steel

$285.95

Rcbs R11601 Die Set 243 Wssm Full Length Steel 7/8

$173.95

Rcbs R12908 Matchmaster Die Set 6.5x47 Lapua Bushi

Don't pay $595.95 $505.95 15.10% OFF

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R11501 Full Length Die Set 6mm Remington Steel 7 8 14 Tpi

Secure Payment Methods