Will the RCBS 11601 die set fit my standard Australian reloading press?

Yes, this die set features the standard 7/8"-14 thread pitch, making it fully compatible with almost all single-stage and progressive reloading presses commonly used in Australia, such as those from RCBS, Lee, Hornady, and Lyman. Because it is a purely mechanical steel hand tool with no electrical components, it requires no Australian electrical certifications or 240V power.

Can I use the RCBS R11601 dies to reload standard .243 Winchester or .25 WSSM cartridges?

No, the RCBS 11601 die set is engineered strictly and exclusively for the .243 Winchester Super Short Magnum (.243 WSSM) cartridge. It cannot be used for standard .243 Winchester or sibling cartridges like the .25 WSSM, as each requires its own dedicated caliber-specific die set.

Do I need to use case lubricant with the RCBS .243 WSSM Full Length Die Set?

Yes, because these are steel rifle dies rather than carbide, you must manually apply a compatible case lubricant to your brass prior to full-length sizing. Failing to lubricate your .243 WSSM cases will result in a stuck brass case inside the sizing die, halting your reloading process.

Why should I choose a full-length sizing die instead of a neck sizing die for my .243 WSSM ammo?

Full-length sizing resizes the fired brass back to strict SAAMI minimum dimensions and works the entire 1.05 to 1.1 lb die set's capabilities to ensure maximum chambering reliability across multiple rifles. This makes it ideal for hunting scenarios where smooth chambering is critical, whereas neck sizing is typically reserved for maximizing brass life in a single bolt-action rifle exclusively.

.243 WSSM Die Set - RCBS R11601

The RCBS 243wssm Full Length Die Set (Model 11601) is a specialized, non-powered mechanical reloading tool designed for handloaders working with the high-velocity .243 Winchester Super Short Magnum (.243 WSSM) cartridge. This two-die set is engineered to restore fired brass to standard dimensions and seat new bullets with high precision, making it an essential addition to the benches of medium-game hunters and varmint shooters who load their own ammunition.

Key Features

Full-Length Sizer Die: Resizes the entire exterior of the fired brass case back to SAAMI minimum cartridge dimensions, ensuring reliable chambering. It simultaneously de-primes the spent primer and expands the case neck to accept a new bullet.
Integrated Air Vents: The sizer die features built-in vent holes to prevent air or excessive case lubricant from becoming trapped, which protects the brass from denting and damage during the sizing stroke.
Seater Die with Built-In Crimper: Seats the bullet accurately to the desired depth while featuring an integrated roll crimper to secure the bullet in place in a single operation.
Strict Tolerances: Headspace is held to exceptionally tight tolerances to minimize case stretching, extending the service life of your reloading brass.

Product Specifications

Brand: RCBS
Model/Part Number: 11601 (also listed as R11601)
Calibre Compatibility: .243 Winchester Super Short Magnum (.243 WSSM) exclusively
Thread Size: Standard 7/8"-14 thread
Length: 6.0 inches (approx. 15.2 cm)
Width: 4.5 inches (approx. 11.4 cm)
Height: 1.8 inches (approx. 4.6 cm)
Weight: 1.05 to 1.1 lbs (approx. 0.48 to 0.50 kg)

Who is the Rcbs 243wssm Full Length Die Set for?

Medium-game hunters and varmint shooters — requires a dedicated .243 WSSM full-length rifle die set to ensure maximum chambering reliability across multiple firearms, utilizing a heavy-duty steel tool measuring 6.0 inches in length.
Handloaders utilizing standard reloading machinery — utilizes the universal 7/8"-14 thread specification to ensure this RCBS reloading tool integrates seamlessly with standard single-stage and progressive presses.

Less suitable for: shooters reloading cartridges outside of the exact .243 WSSM chambering (such as standard .243 Winchester or .25 WSSM), or handloaders seeking to maximize brass life exclusively for a single bolt-action rifle who would be better served by a neck-sizing-only rifle die that does not work the case body. Additionally, because these are steel dies, they are not suitable for dry operation and require the manual application of case lubricant to prevent stuck brass.

SKU	RC39172LP
Model #	R11601
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Primos Hunting Game Caller Randy Anderson Predator

$61.95

Lyman Trius Trap Birdshooter 2 Fully Adjustable Wi

$160.95

Allen Cascade Neoprene Gun Sling With Molded Ends

$56.95

Cci Maxi Mag 22 Wmr 40gr Jhp Rimfire Ammunition 18

Don't pay $41.95 $34.95 16.69% OFF

Recommended Products

Rcbs R10308 Matchmaster Die Set 204 Ruger Full Len

Don't pay $595.95 $505.95 15.10% OFF

Rcbs R11201 224 Valkyrie Die Set Full Length Steel

$285.95

Rcbs R14501 416 Barrett Die Set 1 5x12 Full Length

Don't pay $1,396.95 $1,186.95 15.03% OFF

Rcbs R14701 30-40 Krag Die Set Full Length 7/8-14

$173.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R11601 Die Set 243 Wssm Full Length Steel 7/8-14

Secure Payment Methods