Which specific cartridges are compatible with the RCBS Pro Chucker 7 Shell Plate #18?

This shell plate is specifically engineered to securely hold and index the rim profiles of .44 Remington Magnum, .44 S&W Special, and .44 S&W Russian cartridges. It is strictly limited to this .44 caliber family and cannot be used with other calibers like 9mm Luger or .223 Remington.

Can I use this 7-station shell plate on a standard RCBS Pro Chucker 5 press?

No, this is a 7-station shell plate designed exclusively for the RCBS Pro Chucker 7 progressive press. To use it on a base Pro Chucker 5 press, you must first upgrade the press using the RCBS Pro Chucker 5 to 7 Conversion Kit.

Does this mechanical reloading component require any electrical certifications or compliance checks for use in Australia?

No electrical certifications are required. Because the Shell Plate #18 is a fully mechanical, non-electrical tool steel component weighing approximately 210 to 222 grams, it does not involve 240V power or SAA/RCM safety approvals and is ready for immediate setup on your reloading bench.

How should I maintain this hardened steel shell plate to prevent corrosion in humid Australian environments?

Constructed from precision-machined, hardened steel, the plate should be stored in a low-humidity, climate-controlled environment when not in use to prevent surface rust and oxidation. Regular light wiping with a quality gun oil or rust preventative will maintain its tight tolerances and smooth indexing over years of high-volume reloading.

RCBS R88961 Shell Plate - RCBS R88961

The RCBS Pro Chucker 7 Shell Plate #18 (Model R88961) is a precision-engineered, hardened steel reloading accessory designed specifically for high-volume progressive ammunition reloading. Operating on a purely mechanical basis, this shell plate requires no electrical power or Australian regulatory certifications, making it directly compatible with progressive reloading benches in Australia. It functions by holding, aligning, and indexing cartridge cases precisely through the press cycle to prevent runout and case feeding errors.

Key Features

7-Station Configuration: Engineered specifically to support the advanced layout of a 7-station press, allowing the simultaneous use of bullet feeders, separate seating and crimping dies, and safety powder-checking dies.
Precision Alignment: Machined from hardened tool steel to exacting tolerances to ensure each cartridge case aligns perfectly with the reloading dies.
High-Volume Output: Enables operators to maintain an efficient progressive workflow, supporting a reloading throughput of approximately 600 rounds per hour.
Caliber Specificity: Designed with the precise rim dimensions required for the RCBS Shell Plate #18 cartridge family.

Product Specifications

Brand: RCBS
Model Number: R88961
Plate Designation: #18
Station Count: 7 stations
Material: Hardened tool steel
Weight: Approximately 210 to 222 grams (shipping weight 0.46 to 0.49 lbs)
Packaged Dimensions: Approximately 10.67 cm L x 9.02 cm W x 1.91 cm H (4.20" L x 3.55" W x 0.75" H)
Compatible Cartridges: .44 Remington Magnum, .44 S&W Special, and .44 S&W Russian

Who is the Rcbs Pro Chucker 7 Shell Plate #18 for?

High-volume handloaders of .44 caliber ammunition — requires the 7 stations of this specific progressive press shell plate to run advanced reloading dies, bullet feeders, and safety powder checkers simultaneously for .44 Remington Magnum, .44 S&W Special, and .44 S&W Russian cases.
RCBS progressive press operators — requires this heavy-duty 210 to 222 grams hardened steel progressive press shell plate to convert their compatible progressive press setup to run the .44 caliber cartridge family.

Less suitable for: operators reloading cartridges outside the .44 caliber family, such as .223 Remington or 9mm Luger, which are physically incompatible with the shell plate's dimensions; these users require a different shell plate number, such as Shell Plate #10 or #16. Additionally, users operating a standard 5-station progressive press without the conversion kit installed cannot use this 7-station plate and require a 5-station progressive press shell plate instead.

SKU	RC39274LP
Model #	R88961
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lyman Perfect Case Trimmer Specific Pilot Reloadin

$20.95

Lyman Trius Trap Birdshooter 2 Fully Adjustable Wi

$160.95

Allen Cascade Neoprene Gun Sling With Molded Ends

$56.95

Cci Maxi Mag 22 Wmr 40gr Jhp Rimfire Ammunition 18

$34.95

Recommended Products

Uncle Mikes Buttstock Shell Holder Rifle Flap Styl

$44.95

Lee Precision X-press Shell Holders Set 11pcs 9162

$82.95

Lee Precision 90992 Case Length Gauge And Shell Ho

$19.95

Rcbs Precise Machining 5 Station Shell Plate Reloa

$88.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R88961 Pro Chucker 7 Shell Plate 18 .44 Magnum Steel

Secure Payment Methods