What calibre of cartridge cases is the RCBS R90419 pilot designed for, and how does it interface with turning tools?

This pilot is strictly engineered for .36 calibre brass necks and is designed to exclusively fit and lock into the RCBS Hand Case Neck Turner tool. Constructed from precision-machined, hardened steel, it acts as an internal mandrel to guide the case smoothly and ensure uniform brass wall thickness.

How fine are the adjustments when using this pilot with the RCBS Hand Case Neck Turner?

When paired with the RCBS Hand Case Neck Turner system, the setup allows for micro-adjustments in increments of 0.0005 inches. This high level of sensitivity allows precision reloaders to carefully shave outer brass variations and achieve uniform bullet-release tension.

Are there any electrical safety compliance certifications or Australian plug requirements for this reloading accessory?

No electrical certifications or Australian SAA/RCM approvals are required because the RCBS Hand Case Neck Turner Pilot is a purely mechanical, non-electrical hand tool accessory. It does not use 240V mains power and is simply an imported American-made component for manual benchtop reloading.

How many cases can I comfortably process in a single session given its manual design?

The RCBS hand-turning setup is optimized for low-to-medium volume, high-precision batches rather than mass production. Because it is a purely manual hand tool, processing high volumes of hundreds of cases can lead to physical hand fatigue during extended sessions.

Neck Turner Pilot - RCBS R90419

The RCBS Hand Case Neck Turner Pilot .36 Cal is a precision-machined, hardened steel reloading accessory designed specifically for the RCBS Hand Case Neck Turner tool. Acting as an internal mandrel, this pilot slides inside pre-expanded cartridge case necks to guide the brass smoothly during the turning process. By keeping the case neck concentric with the cutting tool, it allows reloaders to shave away outer brass variations and achieve a uniform neck wall thickness. This manual, non-electrical component is built to demanding tolerances to support highly precise ammunition preparation.

Key Features

Concentric Alignment: Serves as a rigid internal mandrel that centers .36 calibre brass necks perfectly against the cutter of the parent tool.
Micro-Tolerance Support: Enables reloaders to leverage the host tool's fine-tuning system to shave brass in increments of 0.0005 inches (0.0127 mm).
Hardened Steel Construction: Machined from high-grade hardened steel to resist wear and maintain dimensional consistency over long-term use.
Calibre-Specific Fit: Tailored exclusively for .36 calibre necks to eliminate play and ensure consistent, uniform wall thickness.

Specifications

Model: R90419
Calibre: .36 calibre
Material: Hardened steel
Compatibility: Fits the RCBS Hand Case Neck Turner tool
Adjustment Increment Support: 0.0005 inches (0.0127 mm)
Operation: Manual (no electrical power or Australian plug required)

Who is the Rcbs Hand Case Neck Turner Pilot .36 Cal for?

Precision reloaders — requiring highly uniform brass preparation for .36 calibre cartridges, where this pilot ensures the case neck wall thickness is perfectly concentric by working in tandem with the parent tool's 0.0005 inches adjustment capability.
Benchrest shooters — aiming to eliminate bullet run-out in .36 calibre ammunition by stabilizing the case neck against the cutter to achieve consistent neck wall thickness tuned to micro-adjustments of 0.0005 inches.
Long-range competitors — seeking uniform bullet-release tension across .36 calibre brass casings, utilising the precise centering of this mandrel-style pilot to standardise case neck friction.

Less suitable for: High-volume reloaders processing hundreds of cases per session, as the manual hand-turning operation required with this .36 calibre pilot leads to physical fatigue over high-throughput batches; these users are better suited to motorized lathe prep stations or power-drill-driven case trimmers.

SKU	RC39288LP
Model #	R90419
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Champion Hunting Shooting Traps And Targets Perfec

$55.95

Weaver Rifle Scope Mount Rings Sure Grip Windage A

Don't pay $101.95 $85.95 15.69% OFF

Cci Clean-22 .22lr Subsonic Target Ammunition 40gr

Don't pay $26.95 $22.95 14.84% OFF

Allen Tac Six Veloctity Scoped Rifle Case Black 55

Don't pay $276.95 $234.95 15.17% OFF

Recommended Products

Rcbs R90279 Trim Pro 3 Way Cutter Assembly 6mm Cal

$227.95

Rcbs R90283 Trim Pro 3 Way Cutter 7mm Assembly

$227.95

Rcbs R90401 Hand Case Neck Turner Kit Micrometer A

$264.95

Rcbs R90413 Hand Case Neck Turner Pilot 30 Cal Ste

$49.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R90419 Case Neck Turner Pilot 36 Cal Hardened Steel

Secure Payment Methods