What specific cartridge does the RCBS Shell Holder #15 fit?

The RCBS Shell Holder #15 (Part No. 9215) is specifically machined to match the rim and case head geometry of the 6.5x50mm Japanese Arisaka cartridge. It is strictly rated for this calibre and captures exactly 0.125 inches (3.175 mm) of the case head for proper SAAMI headspacing.

Can I use this shell holder on a progressive reloading press?

No, this model is incompatible with progressive reloading presses. Progressive setups require a multi-stage rotary shell plate rather than an individual single-stage slip-in shell holder like the #15, which is built explicitly for standard single-stage and turret presses featuring a universal ram slot.

What material is the RCBS #15 shell holder made from and how durable is it?

It is constructed from high-grade, heat-treated hardened steel with a corrosion-resistant silver finish to prevent wear, bending, or deformation under heavy press leverage. Weighing approximately 0.0375 lbs to 0.05 lbs (17 to 22.7 grams), its internal pocket is cut to strict dimensional tolerances to guarantee concentric alignment and prevent brass slippage during handloading.

Does this reloading accessory require any electrical certifications for use in Australia?

No, the RCBS Shell Holder #15 is an entirely mechanical, unpowered reloading tool containing no electrical components, circuitry, or power cords. Therefore, 240V compatibility, AU plugs, and SAA or RCM certifications are not applicable, allowing you to integrate it into your workshop setup immediately.

Shell Holder - RCBS R9215

Rcbs Shell Holder # 15 Overview

The RCBS Shell Holder # 15 (Part No. 9215) is a precision-engineered metallic reloading accessory designed to secure, support, and align cartridge cases during handloading. Built from high-grade, heat-treated hardened steel, this mechanical tool ensures precise concentric alignment between the cartridge case and the resizing, de-priming, and bullet seating dies. It features a corrosion-resistant silver finish designed to withstand typical workshop environments. Because it is an entirely mechanical, unpowered accessory, it requires no electrical compliance validation or SAA certifications for immediate integration into Australian reloading setups.

Key Features

Concentric Alignment: Engineered to hold the cartridge case centered with the reloading dies to prevent brass slippage and ensure consistent results.
Hardened Steel Construction: Heat-treated to resist wear, bending, or deformation under heavy press leverage.
Corrosion Resistance: Finished with a protective silver coating to prevent rust during long-term storage and use.
Universal Slot Compatibility: Fits standard single-stage and turret presses utilizing a universal ram system.
Priming Tool Integration: Fully compatible with specific benchtop and hand priming tools, including the RCBS Auto Priming Tool and the RCBS Hand Priming Tool.

Specifications

Manufacturer Part Number (MPN): 9215
Material: Heat-treated hardened steel
Finish: Corrosion-resistant silver
Case Head Capture: Exactly 0.125 inches (3.175 mm) for proper SAAMI headspacing
Weight: Approximately 17 to 22.7 grams (0.0375 lbs to 0.05 lbs)
Unit Dimensions: Approximately 2.0 inches wide x 2.25 inches long x 0.25 inches high (packaged footprint: 1.95 in x 5.95 in x 0.55 in)
Calibre Compatibility: 6.5x50mm Japanese Arisaka

Who is the Rcbs Shell Holder # 15 for?

Handloaders reloading 6.5x50mm Japanese Arisaka ammunition — requires an RCBS single stage shell holder designed to capture exactly 0.125 inches (3.175 mm) of the case head to maintain SAAMI headspacing and ensure accurate alignment during resizing.
Reloaders utilizing single-stage or turret presses — requires a compact RCBS single stage shell holder weighing between 17 and 22.7 grams that fits standard universal ram slots to secure the cartridge case during manual handloading.

Less suitable for: progressive reloading setups, which require a multi-stage rotary shell plate rather than a single-stage slip-in shell holder, or for loading non-compatible calibres (such as .308 Win or .223 Rem) which require a different numbered RCBS shell holder to prevent torn rims and jammed dies.

SKU	RC39289LP
Model #	R9215
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Allen 3d Leafy Omnitex Blind Fabric Mossy Oak Infi

$80.95

Uncle Mikes Buttstock Shell Holder Shotgun Open St

Don't pay $37.95 $31.95 15.81% OFF

Cci Clean-22 .22lr Subsonic Target Ammunition 40gr

Don't pay $26.95 $22.95 14.84% OFF

Allen Al28244 Tac Six Duty Riot Tactical Shotgun C

Don't pay $131.95 $111.95 15.16% OFF

Recommended Products

Rcbs R9221 Shell Holder 21 For 303 Savage Reloadin

$33.95

Rcbs R9233 Shell Holder 33 For 50 Ae Hardened Stee

$33.95

Rcbs R99238 Shell Holder #38 Hardened Steel Rum Ca

$33.95

Rcbs Perfect Shell Holder High Quality Reloading E

$29.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R9215 Shell Holder #15 Hardened Steel 6.5x50mm Arisaka

Secure Payment Methods