Can I use the RCBS Pilot Neck Reamer .35 Cal with my RCBS Trim Pro Power Case Trimmer?

No, the manufacturer explicitly states that this tool must not be used with powered case trimmers such as the RCBS Trim Pro Power Case Trimmer. Excessive rotational speed from powered units can damage the hardened steel pilot-reamer and ruin your brass cases. It is strictly designed for manual operation with hand-cranked setups like the RCBS Trim Pro Manual or Rotary Case Trimmer-2.

Does this .35 caliber reamer require any special electrical certifications or SAA/RCM approval for use in Australia?

No electrical certification is required. Because the RCBS Pilot Neck Reamer .35 Cal is a purely mechanical, non-powered reloading accessory containing zero electrical components, it is entirely exempt from 240V compatibility requirements and SAA/RCM regulatory compliance. It can be legally operated across all Australian states and territories straight out of the box.

How does the RCBS R98889 achieve consistent neck tension for .35 caliber reloading?

The R98889 features a hardened steel construction measuring approximately 2.3 inches in length and weighing 0.0625 lbs. It functions as a guide pilot while simultaneously reaming the inside of the case neck. When paired with the RCBS Case Neck Turner, it allows the inside and outside of the case neck to be turned concurrently, shaving away excess brass to guarantee concentric case necks and precise bullet alignment.

Can the RCBS R98889 pilot-reamer be adjusted to fit calibers other than .35?

No, this pilot-reamer is fixed strictly to a .35 caliber standard and cannot be adjusted or modified to work with other case sizes. If you are reloading alternative rifle or pistol calibers such as .30 cal or 22 cal, you will need to purchase separate, caliber-specific pilots to ensure proper fit and safety.

Case Neck Reamer - RCBS R98889

The RCBS Pilot Neck Reamer .35 Cal (Model R98889) is a precision-engineered, hardened steel reloading accessory designed to assist handloaders in uniforming brass cartridge cases. Weighing 0.0625 lbs (approximately 28.3 grams), this mechanical tool functions as both a guide pilot and an inside neck reamer. It is designed to measure approximately 2.3 inches (58.4 mm) in length, 0.85 inches (21.6 mm) in width, and 0.80 inches (20.3 mm) in height. When used alongside the RCBS Case Neck Turner, it allows users to turn the inside and outside of the case neck at the exact same time, shaving away excess brass to correct variations in neck wall thickness. This process guarantees concentric case necks, which leads to highly consistent neck tension and proper bullet alignment.

Key Features

Dual-Action Operation: Functions simultaneously as a guide pilot and an inside neck reamer when combined with the RCBS Case Neck Turner attachment.
Concentricity and Consistency: Shaves excess brass from neck walls to eliminate thickness variations, ensuring uniform neck tension and tighter downrange groupings.
Hardened Steel Construction: Built from durable hardened steel to maintain precise cutting tolerances over extended use.
Australian Regulatory Compliance: As a purely mechanical, non-powered reloading hand tool, it has no electronic components and requires no SAA or RCM electrical safety certifications for use or sale in Australia.

Product Specifications

Model Number: R98889 (SKU 98889)
Calibre: .35 caliber
Material: Hardened Steel
Weight: 0.0625 lbs (28.3 grams)
Length: 2.3 inches (58.4 mm)
Width: 0.85 inches (21.6 mm)
Height: 0.80 inches (20.3 mm)
Power Source: Manual mechanical operation
Compatibility: Exclusively compatible with the RCBS Case Neck Turner, RCBS Trim Pro Manual Trimmer, and RCBS Rotary Case Trimmer-2.

Who is the Rcbs Pilot Neck Reamer .35 Cal for?

Precision handloaders — who require a dedicated reloading case neck reamer specifically engineered for .35 caliber rifle or pistol cartridge cases to uniform brass walls and establish consistent neck tension.
Competitive shooters — seeking to eliminate neck wall thickness variations on .35 caliber brass cases using a lightweight 0.0625 lbs hardened steel pilot to ensure concentric case necks and tighter downrange groupings.

Less suitable for: high-volume reloaders utilizing motorized case prep centers, as this manual tool cannot withstand high-speed rotation and is damaged by motorized devices, making a dedicated power-rated neck reaming system a more appropriate choice.

SKU	RC39303LP
Model #	R98889
Brand	Rcbs
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Allen 3d Leafy Omnitex Blind Fabric Mossy Oak Infi

$80.95

Cci Clean-22 .22lr Subsonic Target Ammunition 40gr

Don't pay $26.95 $22.95 14.84% OFF

Cci #300 Large Pistol Primers For Handgun Reloadin

Don't pay $24.95 $20.95 16.03% OFF

Cci Maxi Mag 22 Wmr 40gr Jhp Rimfire Ammunition 18

Don't pay $41.95 $34.95 16.69% OFF

Recommended Products

Lyman Ly-Handle Case Lube Kit Handle Ergonomic Cus

$27.95

Lyman Primer Pocket Reamer Tip Reloading Accessori

$26.95

Rcbs R88107 Flash Hole Deburring Tool 7mm Hardened

$61.95

Lyman Ammo Checker Single Calibre Reloading Chambe

$58.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Rcbs R98889 Case Neck Reamer .35 Caliber Hardened Steel

Secure Payment Methods