What is the correct depth adjustment for the Redding 01032 decapping rod inside the sizing die?

Redding specifies adjusting the rod inside the sizing die so that exactly 3/16 inch (~4.76 mm) of the decapping pin projects from the bottom of the die. Exceeding this depth risks bending or breaking the rod when the internal sizing button contacts the cartridge case base.

Is the Redding 01032 compatible with popular long-action cartridges like .223 Remington or .30-06?

No, the 01032 is specifically a short-calibre replacement rod designed for cases like the .22 Hornet, .22 BR, and 6mm PPC. For standard and long-action calibres such as .223 Remington or .30-06, a longer decapping rod such as model 01033 or 01034 is required.

Can I use the Redding 01032 decapping rod on Berdan-primed brass commonly found in older surplus ammunition?

No, this decapping rod is strictly designed for standard Boxer-primed bottleneck cases. For Berdan-primed brass featuring dual off-centre flash holes, this decapping rod will bend or shatter and is completely incompatible.

Does the Redding 01032 require any special electrical certification or 240V compatibility for Australian reloading benches?

No electrical certification or 240V SAA/RCM compliance is needed because the Redding 01032 is a purely mechanical firearm reloading die component with no electrical parts or circuits. It is ready for immediate drop-in installation on your Australian reloading bench.

Redding Decapping Rod - Redding 01032

The Redding Decapping Rod (MPN: 01032) is a precision-machined, heat-treated steel replacement stem engineered for Redding Full-Length and Neck Sizing dies. Designed specifically for short-to-medium bottleneck cases and small-calibre cartridges, this mechanical component maintains axial concentricity and straightness within standard 7/8"-14 die bodies. It restores factory tolerances by securing the decapping pin and expander assembly to deprime Boxer-primed cartridge cases during the resizing stroke without introducing case neck runout.

Key Features

Direct OEM Replacement: Replaces bent, stripped, or worn factory decapping stems in Redding sizing dies to restore original factory alignment.
Concentric Alignment: Precision-machined steel construction maintains axial straightness inside the die body to prevent off-centre primer pocket strikes.
Broad Small-Calibre Compatibility: Built for small-action bottleneck cases, including .218 Bee, .22 Hornet, .221 Fireball, .222 Remington, .224 Valkyrie, 6mm BR, 6mm PPC, and WSSM-family cartridges.
Mechanical Simplicity: Non-powered component operating purely on mechanical press leverage without electrical or battery requirements.

Specifications

Manufacturer Part Number (MPN): 01032
Material: Heat-treated, precision-machined steel
Die Body Thread Compatibility: Standard Redding 7/8"-14 sizing dies
Primer Type: Boxer-primed bottleneck cases only
Setup Adjustment Threshold: Requires the decapping pin to protrude exactly 3/16 inch (~4.76 mm) below the base of the die
Supported Calibres: .218 Bee, .218 Mashburn Bee, .22 Hornet, .22 K-Hornet, .221 Remington Fireball, .222 Remington, .220 Russian, .22 Dasher, .22 BR, .224 Valkyrie, .22 PPC, 6mm PPC, 6mm BR, 6mm/222 Rem, 6.5 Grendel, .25-20 Winchester, .223 WSSM, .243 WSSM, and .25 WSSM

Who is the Redding Decapping Rod 218 Bee, 22 Hornet, 222 Rem, 224 Valkyrie, 6br, 6ppc, for?

Benchrest precision reloaders — requiring consistent axial concentricity and a decapping pin protrusion set to exactly 3/16 inch (~4.76 mm) below the die base to deprime .22 BR and 6mm BR cases without risking internal neck runout or base collision.
Varmint hunters — restoring damaged die assemblies with this Redding decapping rod to size and deprime high-volume small-action brass like .22 Hornet, .218 Bee, and .222 Remington to factory tolerances using the 3/16 inch (~4.76 mm) setup standard.
Target shooters — maintaining short-case alignment during the sizing stroke for specialized match cartridges like .224 Valkyrie and 6mm PPC by locking this reloading die decapping rod to the 3/16 inch (~4.76 mm) pin projection threshold.

Less suitable for: Standard and long-action cartridges (such as .22-250, .223 Rem, .243 Win, 6.5 Creedmoor, and .30-06), which require a longer decapping rod assembly (such as models 01033 or 01034), or Berdan-primed brass with dual off-centre flash holes, which will bend or shatter this Boxer-style stem.

SKU	RD41406LP
Model #	01032
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 01023 Decapping Rod For 308 And 30-30 Dies

$29.95

Redding 01034 Decapping Rod Long 22 To 6.5mm Calib

$29.95

Redding 09066 Bullet Seating Micrometer 6.5x55 270

$116.95

Redding 09067 Bullet Seating Micrometer 7 Standard

$116.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 01032 Decapping Rod Small Calibre Steel Construction

Secure Payment Methods