Is the Redding 01035 decapping rod compatible with Redding Type-S Bushing Dies?

No, this model is strictly designed for standard Redding conventional full-length and neck sizing dies. It is incompatible with Redding Type-S Bushing Dies and Competition Bushing Dies, which require specific Type-S decapping rod assemblies.

What specific magnum cartridges is the Redding 01035 designed to fit?

This replacement rod is specifically engineered for long-action magnum cases, including the .257 Weatherby Magnum, 6.5-300 Weatherby Magnum, 26 Nosler, and 6.5 Wby RPM. It is not suitable for standard short or medium-action cartridges like .308 Winchester or 6.5 Creedmoor.

Will this decapping rod work with Berdan-primed brass cases commonly found in surplus ammo?

No, the Redding 01035 is only compatible with Boxer-primed brass featuring a central flash hole. Attempting to use it on Berdan-primed brass with dual flash holes will result in a bent or broken decapping pin.

Does this mechanical component require any Australian electrical compliance certifications like RCM or SAA?

No electrical certifications are required for the Redding 01035. As a purely mechanical, non-powered steel accessory, it falls outside the scope of electrical safety standards such as 240V, SAA, and RCM compliance.

What interface does this rod use for the decapping pin and sizing expander button?

The Redding 01035 utilizes the standard Redding #01060 decapping pin interface and pairs with standard or carbide caliber-matched sizing expander buttons. It is machined to exact factory tolerances to maintain proper concentricity and correct reach inside magnum die bodies during high-volume outback reloading sessions.

Decapping Rod 01035 - Redding 01035

The Redding 01035 Replacement Decapping Rod is a precision-machined, heat-treated steel reloading component designed to restore Redding conventional full-length and neck sizing dies. It serves as a direct factory replacement for bent, stripped, or worn spindle rods. This mechanical assembly retains the decapping pin to expel spent Boxer primers during the resizing stroke while securing the calibre-specific expander button to maintain correct internal neck dimensions on long-action magnum cases.

Key Features

Factory OEM Fit: Engineered to exact Redding factory tolerances to preserve die concentricity and ensure proper reach inside magnum-length cartridge cases.
Dual-Function Assembly: Simultaneously holds the decapping pin for spent primer extraction and anchors the expander button for neck sizing.
Heat-Treated Steel Construction: Precision-machined from hardened steel to withstand standard resizing pressures and prevent flexing during case entry and extraction.
Standard Pin Compatibility: Integrates directly with Redding #01060 standard decapping pins and Redding standard or carbide expander buttons.

Specifications

Model Number: 01035
Material: Heat-treated, precision-machined steel
Calibre Compatibility: .257 Weatherby Magnum, 6.5-300 Weatherby Magnum, 26 Nosler, and 6.5 Wby RPM
Die Compatibility: Redding Conventional Standard Full-Length Sizing Dies and Neck Sizing Dies
Decapping Pin Interface: Redding #01060 decapping pin
Primer Compatibility: Boxer-primed cases only

Who is the Redding 01035 Replacement Decapping Rod for?

Handloaders reloading .257 Weatherby Magnum cartridges — Replaces damaged internal assemblies in sizing dies engineered for .257 Weatherby Magnum brass to reliably decap Boxer primers and expand case necks to a .257-inch bullet diameter.
Precision shooters reloading 6.5-300 Weatherby Magnum ammunition — Restores concentric decapping and sizing function in full-length dies handling high-capacity 6.5-300 Weatherby Magnum cases designed for 6.5 mm (.264-inch) projectiles.
Handloaders servicing 26 Nosler brass — Provides the required reach and factory thread engagement in standard dies to process large-capacity 26 Nosler cartridge cases utilizing standard 6.5 mm expander buttons.

Less suitable for: Standard short- or medium-action cartridges such as .308 Winchester, 6.5 Creedmoor, and .223 Remington (which require shorter calibre-specific decapping rods), Redding Type-S or Competition bushing dies (which require dedicated bushing-style decapping assemblies), or cases with Berdan primer pockets.

SKU	RD102502LP
Model #	01035
Brand	Redding
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 84270 Deluxe Die Set 243 Wssm 3-Die Rifle

$377.95

Lyman Ly-Clk Case Lube Kit 2 Oz Bottle 3 Brushes

$77.95

Redding 71479 Type S Bushing Neck Sizing Die 6.5x4

$210.95

Redding 55726 Competition Seating Stem 6.5mm Vld

$62.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 01035 Replacement Decapping Rod Steel Magnum Dies

Secure Payment Methods