Will the Redding 10721 decapping rod fit my Redding Competition Type-S sizing die for my .308 Winchester?

No, the Redding 10721 decapping rod is specifically engineered for standard Redding Type S Bushing Dies and is not compatible with Redding Competition Type-S dies. Competition dies utilise a specialised sliding sleeve and a different competition decapping rod assembly. Be sure to verify your exact die series before ordering replacement parts.

What specific cartridge lengths and calibres are compatible with part number 10721?

This replacement rod is designed for medium-length cartridge families matching short-action formats, specifically 6.8 SPC, .308 Winchester, 7mm-08 Remington, 7mm SAUM, .300 SAUM, and .30 IHMSA. It is not suitable for shorter cases like the .223 Rem or long-action magnum cases like the .30-06 and .300 Win Mag, which require different rod lengths.

Can I use standard expander buttons or carbide buttons with this decapping rod?

Yes, the Redding 10721 is fully configurable and designed to accommodate Redding standard steel expander buttons, carbide expander buttons, or a straight decapping pin retainer. This allows you to tailor your sizing stroke depending on whether you prefer sizing case necks entirely with bushings or using an internal expander ball.

Does this mechanical reloading accessory require any Australian electrical or RCM certifications?

No electrical compliance or RCM certifications are required for the Redding 10721, as it is an entirely mechanical tool containing no electrical components. It does not interface with 240V mains power, meaning Australian electrical safety approvals and plug standards do not apply to this product.

Decapping Rod - Redding 10721

The Redding Type S Decapping Rod – 6.8 SPC, .308 Win (Part #10721) is an original equipment manufacturer (OEM) replacement component designed for standard Redding Type S Bushing sizing dies. Engineered from precision-machined, heat-treated steel, this rod restores factory concentricity and alignment to Redding Type S Neck Sizing and Full Length Sizing dies chambered in short-to-medium length rifle cartridges. It provides precise primer punch alignment to prevent flash hole damage and minimize neck runout during the sizing stroke.

Key Features

Direct OEM Replacement: Replaces bent, stripped, or damaged decapping stems in standard Redding Type S Bushing dies.
Configurable Expander Assembly: Compatible with Redding standard steel expander buttons, carbide size buttons, or standard decapping pin retainers for bushing-only neck sizing without an expander ball.
Concentric Alignment: Precision-threaded heat-treated steel construction ensures decapping pins remain centered in the cartridge flash hole to reduce brass runout.
Mechanical Simplicity: Fully mechanical reloading component requiring zero power or electrical interfaces.

Specifications

Manufacturer: Redding Reloading Equipment
Part Number: 10721
Material: Heat-treated steel
Shipping Weight: Approximately 20 g to 50 g (0.05 lbs to 0.1 lbs)
Compatible Cartridges: 6.8 SPC, .308 Winchester, 7mm-08 Remington, 7mm SAUM, .300 SAUM, and .30 IHMSA
Die Compatibility: Redding standard Type S Bushing Neck Sizing and Type S Full Length Sizing dies

Who is the Redding Type S Decapping Rod - 6.8, 308 for?

Handloaders reloading .308 Winchester precision rifle ammunition — restores factory decapping and sizing alignment in Redding Type S bushing dies tailored for 51 mm (.308 Win) and similar medium-length case formats.
Handloaders reloading 6.8 SPC cartridges — delivers correct length and decapping pin reach for Type S reloading die setups sizing short 42 mm (6.8 SPC) cartridge cases.
Precision shooters maintaining Redding Type S sizing dies — provides an OEM replacement decapping rod for standard Type S dies across short-action calibres spanning from 6.8mm up to 7mm and .30 caliber short magnums.

Less suitable for: Handloaders running specialized Redding Competition Type-S dies (which require dedicated sliding-sleeve competition decapping rod assemblies), cartridges shorter than 42 mm like the .223 Remington (which require shorter dedicated Type S rods), long-action cartridges exceeding 51 mm like the .30-06 Springfield or .300 Winchester Magnum (which require longer Type S decapping rods), or high-volume removal of heavy military crimped primers (which requires a heavy-duty dedicated universal decapping die).

SKU	RD41445LP
Model #	10721
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 10194 Type S Decapping Pin Retainer 20 Cal

$26.95

Redding 10196 Type S Die Pin Retainer Large Calibr

$26.95

Redding 10711 Type S Decapping Rod Small Calibre S

$21.95

Redding 10715 Type S Decapping Rod 17 And 20 Cal S

$21.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 10721 Type S Decapping Rod 308 Win 68 Spc Steel

Secure Payment Methods