Will the Redding 6mm Creedmoor Master Hunter Die Set work for 6.5 Creedmoor or 6mm ARC cartridges?

No, this die set (model 28443) is engineered exclusively for the 6mm Creedmoor cartridge using .243-inch projectiles. It is not compatible with other variants such as 6.5 Creedmoor, 6mm ARC, or 6mm BR. Attempting to use these dies with different cartridges will result in improper sizing and potential damage to your brass.

What type of sizing does the included sizing die perform, and does it use interchangeable neck bushings?

The sizing die in this set performs full-length sizing to bring fired brass back to SAAMI dimensions for reliable chambering in bolt-action or semi-automatic rifles. It utilizes a fixed-dimension neck and a standard expander ball rather than interchangeable neck bushings. If you require custom neck tension control via bushings, you would need to look at Redding's Type S Match Bushing Die sets.

What thread size do these dies use, and will they fit standard Australian reloading presses?

The dies feature a standard 7/8"-14 thread interface, making them fully compatible with almost all standard single-stage and turret reloading presses commonly available in Australia, including presses from Redding, RCBS, Lee, Hornady, and Lyman. Because this is a purely mechanical reloading tool, electrical standards like 240V, SAA approvals, and RCM compliance markings are not applicable.

How fine is the adjustment on the competition seating die for the 6mm Creedmoor Master Hunter set?

The competition seating die features a micrometer adjustment top with a free-floating seating stem and guide sleeve that precisely aligns the bullet and case. Seating depth is adjustable and clearly indexed down to 0.001-inch increments, allowing you to fine-tune your match-grade ammunition consistency. Additionally, remember that a standard #1 shellholder (Part #11001) is required for setup and is sold separately.

6mm Creedmoor Die Set - Redding 28443

The Redding 6mm Creedmoor Master Hunter Die Set (MPN: 28443) is a precision 2-die reloading set manufactured in the USA. Designed for handloaders who demand benchrest-grade bullet seating alongside dependable field chambering, this set combines a standard Full Length Sizing Die with a Competition Seating Die. It restores fired bottleneck cases to factory SAAMI dimensions to prevent chamber lockups, while the micrometer-topped seating die provides precise, repeatable bullet depth positioning for .243-inch (6mm) diameter projectiles.

Key Features

Competition Seating Die with Micrometer: Uses an internal floating seating stem and alignment sleeve to seat projectiles with minimal runout, featuring an indexed micrometer top adjustable in 0.001-inch (0.0254 mm) increments.
Full-Length Sizing Die: Includes a complete decapping and expander ball assembly to size cases back to factory specifications for smooth feeding in bolt-action and semi-automatic rifles.
Universal Press Interface: Built with industry-standard 7/8"-14 threads to mount directly into standard single-stage and turret reloading presses.
Cartridge-Specific Profile: Purpose-engineered exclusively for the 6mm Creedmoor cartridge.

Product Specifications

Calibre: 6mm Creedmoor (.243 in / 6mm diameter bullets)
Die Set Type: 2-Die Set (Full Length Sizer and Competition Seater)
Thread Pitch: Standard 7/8"-14
Seating Adjustment Increments: 0.001 in (0.0254 mm)
Compatible Shellholder: Redding #1 (Part #11001, sold separately)
Operation: Manual mechanical reloading press

Who is the Redding 6mm Creedmoor Master Hunter Die Set for?

Long-Range Precision Shooters — Provides exact bullet depth tuning for the 6mm Creedmoor reloading die set via a micrometer that adjusts in 0.001-inch increments while keeping runout minimal through a free-floating alignment sleeve.
Bolt-Action Rifle Hunters — Ensures unfailing field feeding by full-length resizing .243 in / 6mm diameter cartridge cases back to SAAMI dimensions while maintaining match-grade seating consistency on standard 7/8"-14 threaded presses.

Less suitable for: Handloaders who need custom neck tension control or cartridge versatility; this set uses a fixed-dimension neck expander rather than interchangeable neck sizing bushings and will not fit other variants like 6mm ARC, 6.5 Creedmoor, or 6mm BR (choose an interchangeable bushing full-length die set or calibre-specific neck-sizing die set instead).

SKU	RD41497LP
Model #	28443
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 80443 6mm Creedmoor Full Length Die Set 7/

$201.95

Redding 88191 Titanium Carbide 3-Die Set 45 Colt 4

$272.95

Redding 84287 204 Ruger Deluxe Reloading Die Set F

$214.95

Redding 74155 Small Base Body Die 308 Winchester R

$120.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 28443 Master Hunter Die Set 6mm Creedmoor 7/8-14 Thread

Secure Payment Methods