Which specific 6.5mm calibres and Redding dies are compatible with the 34263 decapping rod assembly?

The Redding 34263 decapping rod assembly is engineered specifically for standard Redding full-length and neck sizing dies chambered in 6.5x55mm Swedish Mauser (SE), 6.5-284 Winchester, 6.5mm Remington Magnum, 6.5x57mm Mauser, and .264 Winchester Magnum. It features a standard 6.5mm (.264") expander ball. Please note that it is not compatible with dies from other manufacturers like Lee, RCBS, or Hornady, nor is it suitable for Redding Type S Bushing Dies that omit the expander ball.

Can this decapping rod handle brass with small flash holes or Berdan priming?

No, this assembly comes equipped with a standard-diameter decapping pin designed exclusively for conventional Boxer-primed cartridge cases featuring standard ~0.080" flash holes. Attempting to use this rod on brass with small flash holes measuring ~0.060" or Berdan-primed brass will result in bent or broken pins. Handloaders processing specialty brass should use dedicated undersized decapping tools instead.

Does the Redding 34263 require any electrical compliance or special setup when used on the reloading bench in Australia?

No electrical compliance or SAA/RCM certification is required because this is a completely manual, mechanical reloading tool component with zero electrical parts or power requirements. Setup simply involves threading the steel decapping spindle rod into your compatible Redding sizing die and adjusting the height to simultaneously punch spent primers and expand the case neck during your reloading stroke.

What maintenance is recommended to ensure the longevity of the Redding decapping rod assembly during heavy outback reloading sessions?

As a robust bench-mounted workshop accessory, it requires minimal maintenance beyond keeping the threaded steel spindle and expander ball clean and lightly oiled to prevent corrosion in humid or dusty Australian conditions. For optimal case sizing and to reduce friction on the 6.5mm expander ball, pair this assembly with a quality case lube such as Redding Imperial Sizing Die Wax.

Redding Decapping Rod 34263 - Redding 34263

The Redding Decapping Rod Assembly (Part Number: 34263) is an OEM replacement part designed for Redding full-length resizing dies and neck sizing dies. During the reloading stroke, the assembly simultaneously decaps spent Boxer primers and uniforms the internal case neck diameter using an integrated 6.5mm (.264") expander ball. This factory assembly restores concentricity and alignment to reloading dies with bent, damaged, or worn spindle rods.

Key Features

Dual-Action Processing: Combines a replaceable steel decapping pin to punch out spent primers with a standard 6.5mm (.264") expander button to set internal case neck tension in one pass.
Modular Threaded Construction: Features threaded steel components allowing individual parts, such as the decapping pin or expander ball, to be detached, serviced, or replaced.
Direct OEM Alignment: Engineered specifically to match the internal thread pitch and depth specifications of Redding sizing dies across compatible 6.5mm cartridge lengths.

Product Specifications

Manufacturer Part Number: 34263
Compatible Calibres: 6.5x55mm Swedish Mauser (SE), 6.5-284 Winchester / Norma, 6.5mm Remington Magnum, 6.5x57mm Mauser, and .264 Winchester Magnum
Expander Ball Diameter: 6.5mm (.264")
Pin Compatibility: Standard ~0.080" Boxer flash holes
Die Compatibility: Standard Redding full-length and neck sizing dies
Power Requirements: Manual mechanical operation (None)

Who is the Redding 6.5x55 Se, 6.5/284 Win, 6.5mm Rem Mag, 6.5x57 Mauser, 264 Win Mag Decapping Rod Assembly for?

Handloaders reloading 6.5x55mm Swedish Mauser ammunition with Redding dies — restores damaged sizing dies to correct neck tension using a factory-matched 6.5mm (.264") expander ball and integrated steel decapping rod assembly.
Precision rifle shooters reloading .264 Winchester Magnum cases on a reloading bench — maintains uniform internal neck diameters of 6.5mm (.264") and consistent Boxer primer ejection across magnum-length case sizing operations using this dedicated decapping assembly.

Less suitable for: Target cases featuring small flash holes measuring ~0.060" or Berdan-primed brass (which require dedicated small-pin decapping assemblies or manual Berdan decapping tools), Redding Type S Bushing Dies operating without an expander button (which require dedicated Type S decapping assemblies), or non-Redding dies with incompatible internal thread pitches.

SKU	RD41514LP
Model #	34263
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 83544 7mm Stw Form And Trim Die 7/8-14 Thr

$127.95

Lee Precision 90581 Powder Through Expanding Die F

$33.95

Lee Precision 90564 Steel 3 Die Set For 44-40 Winc

$107.95

Redding 28155 Master Hunter Die Set For 308 Winche

$412.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 34263 Decapping Rod Assembly 6.5mm 264 Win Mag

Secure Payment Methods