What press compatibility and accessories do I need to get started with the Redding 36139 die set in Australia?

The Redding 7mm-08 Remington Type S Match Die Set features industry-standard 7/8"-14 threads, making it directly compatible with all major single-stage and turret presses used in Australian reloading benches. You will need a Redding #1 shellholder or Competition Shellholder #11601, and because this set uses interchangeable neck bushings, you must purchase the appropriate size steel or titanium nitride bushing separately to achieve your desired neck tension.

Are there any electrical compliance requirements, plugs, or SAA/RCM certifications needed to operate this die set?

No electrical compliance or SAA/RCM certifications are required. The Redding 36139 is a purely mechanical reloading tool with no electrical components, so 240V mains compatibility and Australian plug standards do not apply to its operation.

How do I correctly set up the neck sizing bushing and expander button to avoid damaging 7mm-08 brass?

The full-length sizing die accepts interchangeable bushings that should ideally be selected to measure 0.001" to 0.002" smaller than your loaded ammunition neck diameter. If you are performing heavy neck reductions greater than approximately 0.004" to 0.005", Redding recommends stepping down in intermediate increments or using an expander mandrel setup to prevent case neck distortion.

Can I use the Type S sizing die without the neck bushing to perform shoulder bump only?

Yes, by removing the internal neck sizing bushing entirely, the Type S full-length sizing die can function strictly as a body and shoulder-bump die without working the case neck. This technique is often preferred by competitive long-range shooters who utilize neck-turned brass and wish to minimize case-neck runout by omitting the standard expander button.

7mm-08 Die Set - Redding 36139

The Redding 7mm-08 Remington Type S - Match Full Die Set (SKU: 36139) is a precision 2-die reloading system designed to resize brass and seat projectiles for the 7mm-08 Remington cartridge. Featuring standard 7/8"-14 threads, the set includes a Type S Bushing Full Length Sizing Die and a Competition Bullet Seating Die. The sizing die uses interchangeable bushings to control neck tension without overworking brass, while the competition seating die employs a close-tolerance internal alignment sleeve and a top-mounted micrometer graduated in 0.001" increments to achieve strict concentricity and precise bullet seating depth.

Key Features

Bushing-Controlled Full-Length Sizing: Accommodates interchangeable sizing bushings (available in 0.001" increments) to regulate neck tension based on specific case wall thickness. Removing the bushing enables the die to serve strictly as a body and shoulder-bump die.
Configurable Decapping Assembly: Includes an expander button and an interchangeable decapping pin retainer, allowing reloaders using neck-turned brass to size without an expander to reduce case-neck runout.
Competition Seating Alignment: Utilises a free-floating seating stem and internal alignment sleeve that axially supports the 0.284" diameter projectile and 7mm-08 Remington case prior to seating.
Micrometer Seating Depth Adjustment: Adjusts seating depth in precise 0.001" increments via the top-mounted micrometer dial for exact cartridge overall length (COAL) repeatability.
Standard Press Mounting: Uses standard 7/8"-14 TPI threads for compatibility with single-stage and turret reloading presses.

Product Specifications

Product: Redding 7mm-08 Remington Type S - Match Bushing Full Die Set
Model/SKU: 36139
Cartridge Calibre: 7mm-08 Remington (0.284" bullet diameter)
Die Interface Thread: 7/8"-14 TPI
Included Dies: Type S Bushing Full Length Sizing Die (#77139), Competition Bullet Seating Die (#55139)
Micrometer Graduation: 0.001" increments
Shellholder Requirement: Industry-standard #1 shellholder (sold separately)
Operation Type: Mechanical (manual reloading press)

Who is the Redding 7mm-08 Remington Type S - Match Full Die Set for?

Precision handloaders — requires precise brass neck dimensions for the 7mm-08 Remington cartridge, enabled by interchangeable bushings adjustable in 0.001" increments on standard 7/8"-14 threaded reloading presses.
Competitive long-range shooters — relies on the 7mm-08 reloading die set to eliminate seating depth variance and minimise runout using an internal alignment sleeve and micrometer adjustments graduated in 0.001" increments.
Precision hunters — seeks uniform bullet retention and concentric ammunition for 0.284" diameter projectiles, using full-length sizing and seating depth controlled down to 0.001" increments.

Less suitable for: Loaders processing mixed-lot brass with neck reductions exceeding 0.004" to 0.005" in a single pass without stepping down, or high-volume shooters who do not require bushing-level neck tension control; standard non-bushing full-length die sets are better suited for unsorted high-volume reloading.

SKU	RD41518LP
Model #	36139
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 36316 Match Full Die Set 22 Br Remington 7

$512.95

Redding 36428 Type S Match Die Set 280 Rem Ai 7mm

$436.95

Redding 38136 Type S Match Die Set 7mm Rem Mag

$501.95

Redding 38141 Type S Match Die Set 284 Winchester

$721.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 36139 Type S Match Die Set 7mm 08 Remington Bushing

Secure Payment Methods