Will the Redding 55748 seating stem fit my standard Redding 2-Die set?

No, this specific stem is engineered exclusively as a drop-in, free-floating replacement for Redding Competition Bullet Seating Dies in 7mm. It is incompatible with Redding Standard 2-Die sets that use 1/2-20 threaded micrometer tops.

How does the VLD profile prevent bullet tip damage during long-range reloading?

Standard seating stems often bottom out on delicate polymer tips or high-BC meplats, causing deformation rings. The Model 55748 features a modified internal contact angle with a steeper geometry designed to engage the long secant ogive further down the bullet for uniform seating.

Are there any electrical safety certifications or 240V requirements for using this reloading component?

No. The Redding 55748 is a purely passive, non-powered mechanical tool made of precision-machined steel. Consequently, Australian 240V mains power and SAA or RCM electrical safety certifications are not applicable to this product.

Which specific 7mm bullet profiles require this 'Long' VLD stem rather than a standard stem?

This long profile stem is specifically designed for extended, high-BC 7mm (.284 calibre) VLD projectiles such as the Hornady ELD-Match, ELD-X, and Berger hybrids. Shorter or standard tangent-ogive bullets require Redding's standard profile stem instead.

7mm VLD Seating Stem - Redding 55748

The Redding 55748 VLD Bullet Seating Stem is a precision-machined steel replacement component engineered specifically for Redding Competition Bullet Seating Dies. Designed to accommodate long, high-ballistic-coefficient (BC) 7mm (.284 calibre) Very Low Drag (VLD) projectiles, this stem eliminates meplat bottoming and prevents nose deformation. By altering the internal contact geometry to bear against the bullet's secant ogive rather than the fragile tip, it preserves aerodynamic integrity and ensures consistent seating depth across match-grade handloads.

Key Features

Optimised VLD Contact Angle: Features a deeper internal taper designed specifically to seat long secant-ogive projectiles on the ogive, preventing jacket ring marking and meplat tip damage.
Free-Floating Die Integration: Integrates directly into the straight-line internal sleeve of Redding Competition Seating Dies to maintain alignment and minimise total indicated runout (TIR).
Precision Machined Steel: Manufactured from ground steel for tight tolerances and repeatable seating depth across extended loading sessions.
Calibre-Specific Profile: Engineered to seat long 7mm projectiles across various bottleneck cases, including 7mm-08 Remington, 7mm Remington Magnum, 7mm PRC, 7mm SAUM, and .284 Winchester.

Specifications

Manufacturer Part Number (MPN): 55748 (RED55748 / R55748)
Calibre Compatibility: 7mm (.284 calibre)
Bullet Profile: Long VLD (Very Low Drag) / secant ogive
Die Compatibility: Redding Competition Bullet Seating Dies only
Material: Precision-machined and ground steel
Packaged Dimensions: 5.00 × 3.00 × 0.30 inches (~127 × 76 × 7.6 mm)
Packaged Weight: Approximately 0.1 lb (~45 g)
Power Requirements: None (manual mechanical tool)

Who is the Redding 55748 VLD Seating Stem for?

Competitive long-range target shooters — loading high-BC 7mm (.284 calibre) projectiles who need a dedicated seating stem that contacts the secant ogive without damaging delicate meplats or distorting bullet tips during the seating stroke.
Precision handloaders — utilising Redding Competition Seating Dies across 7mm (.284 calibre) bottleneck cartridges who require tight-tolerance, free-floating bullet seating stems to preserve straight-line concentricity and reduce runout.

Less suitable for: Handloaders using Redding Standard 2-Die sets with 1/2-20 threaded micrometer tops, or those seating shorter standard tangent-ogive 7mm (.284 calibre) projectiles, which require standard-profile seating stems (such as Redding Part #55028 or #55728) or threaded micrometer plugs instead.

SKU	RD102738LP
Model #	55748
Brand	Redding
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

Don't pay $488.95 $414.95 15.13% OFF

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Recommended Products

Redding 55742 Vld Seating Stem 22 Caliber Long Rel

$62.95

Redding 28132 Master Hunter Die Set 6.5x55 Swedish

Don't pay $502.95 $426.95 15.11% OFF

Redding 38317 Match Die Set 6mm Br Bushing Neck

Don't pay $590.95 $501.95 15.06% OFF

Redding 80275 Full Length 2 Die Set 300 Rem Saum 7

$282.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 55748 Vld Seating Stem 7mm Long Competition Die

Secure Payment Methods