Are neck bushings included in the Redding 7mm PRC Type S Elite Die Set?

No, neck bushings are sold separately and are required to complete your setup. For this 7mm PRC die set, you will typically need standard Redding bushings sized between .307 and .315 inches, depending on your brass neck wall thickness.

Can I use this 7mm PRC die set on other 7mm cartridges like the 7mm Remington Magnum?

No, this die set (Model 60936) is strictly engineered for the 7mm Precision Rifle Cartridge (7mm PRC) only. It is completely incompatible with other 7mm variants such as the 7mm Remington Magnum, 7mm-08, or 28 Nosler due to differing case dimensions.

What shellholder do I need to pair with this die set on my reloading press?

This die set features an industry-standard 7/8"-14 thread pitch that fits most standard single-stage and turret presses commonly used in Australia. For correct case extraction and holding, you will need to pair it with a Redding #6 Standard Shellholder or a #6 Competition Shellholder Set.

Does this reloading die set require any Australian electrical compliance certifications?

No, the Redding Type S Elite Die Set is a purely mechanical, non-powered reloading accessory. It does not require electricity, batteries, or any Australian electrical compliance certifications such as RCM or SAA.

7mm PRC Die Set - Redding 60936

The Redding 7mm PRC Type S - Elite Bushing Die Set (MPN: 60936) is a precision three-die reloading system engineered specifically for the 7mm Precision Rifle Cartridge (.284 in / 7.21 mm bullet diameter). Built to industry-standard 7/8"-14 thread pitch dimensions, this set provides dual sizing options alongside micrometer-controlled bullet seating. It includes a Type S Bushing Full Length Sizing Die, a Type S Bushing Neck Sizing Die, and a Redding Competition Bullet Seating Die equipped with a VLD seating stem. Handloaders can regulate case neck tension without overworking brass necks or requiring expander balls, while the floating alignment sleeve eliminates runout for extreme-spread reduction across single-stage and turret reloading presses.

Key Features:

Three-Die Architecture: Contains a Type S Full Length Bushing Die, a Type S Neck Bushing Die, and a Competition Seating Die with an included VLD seating stem.
Interchangeable Bushing System: Accepts standard 1/2" diameter steel or titanium nitride neck bushings to adjust neck tension in precise .001" increments (bushings sold separately).
Competition Seating Alignment: Features a micrometer-adjustable seating head graduated in .001" increments combined with an internal floating sleeve that centers both case and bullet before seating.
Dual Sizing Flexibility: Allows handloaders to full-length resize for reliable chambering in field conditions or neck-size only to preserve fire-formed brass dimensions for dedicated bolt-action rifles.
Press Compatibility: Utilises standard 7/8"-14 threads to mount directly into standard single-stage and turret presses without electrical or specialised power requirements.

Specifications:

Calibre: 7mm Precision Rifle Cartridge (7mm PRC)
Bullet Diameter: .284 in (7.21 mm)
Thread Size: Standard 7/8"-14 pitch
Recommended Bushing Range: .307 in to .315 in
Shellholder Compatibility: Redding #6 Standard Shellholder (Part #11006) or #6 Competition Shellholder Set (Part #11606)
Packaged Boxed Weight: Approximately 0.7 kg to 0.9 kg

Who is the Redding 7mm PRC Type S - Elite Die Set for?

Long-range precision rifle competitors — requires precise control over brass concentricity and neck tension using interchangeable bushings across the .307 in to .315 in range in this 7mm PRC elite die set to minimise velocity spread and bullet runout on 7/8"-14 threaded presses.
Extreme-range hunters developing VLD bullet loads — benefits from the 7mm PRC elite die set featuring a dedicated VLD seating stem and micrometer adjustments graduated in .001" increments to dial exact seating depths for high-BC .284-calibre projectiles.

Less suitable for: Reloaders chambered in alternative 7mm calibres such as 7mm Remington Magnum, 7mm-08 Remington, or 28 Nosler; dedicated cartridge-specific die sets matching those respective chamber dimensions are required instead.

SKU	RD41696LP
Model #	60936
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 38415 Type S Match Neck Die Set 6.5 284 Wi

$501.95

Rcbs Sizer Expander Seater Die Set Roll Crimp Stra

$294.95

Redding 84135 270 Winchester Deluxe 3 Die Set For

$214.95

Lyman Ly-243 .243 Winchester Rifle 2 Die Set 7/8-1

$167.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 60936 Elite Bushing Die Set 7mm Prc 3-Die

Secure Payment Methods

Calculate Shipping