What specific calibre range does the Redding Large Universal Decapping Die support, and can I use it for .223 Remington cases?

The Redding Large Universal Decapping Die (Model 69200) is built specifically for cartridges with neck diameters from 7mm (.284 calibre) up to .50 calibre with a maximum case length of 3.0 inches. It will not accommodate neck diameters under .25 calibre. Therefore, you cannot use this large variant for .223 Remington cases, which require the Redding Small Universal Decapping Die instead.

Will this decapping die fit onto my standard Australian-market reloading press?

Yes, the Redding Large Universal Decapping Die features the industry-standard 7/8"-14 TPI threading. It is fully compatible with all common single-stage, turret, and progressive reloading presses sold in the Australian market that utilize this standard thread pitch, including brands like RCBS, Hornady, Lee, Lyman, and Redding.

Do I need to apply case lubricant to my brass before running them through this decapping die?

No case lubrication is necessary when using the Redding Large Universal Decapping Die. Because the die body is designed exclusively to punch out spent primers without touching or resizing the case walls or neck, friction is minimal and case lube is completely bypassed in your pre-cleaning workflow.

Are there any specific safety warnings regarding live primers with this decapping tool?

Yes, the manufacturer explicitly warns that you must never attempt to decap live primers using the Redding Large Universal Decapping Die. This tool is engineered strictly for safely punching out spent, fired primers from brass rifle and pistol cartridge cases during your wet-tumbling or ultrasonic cleaning preparation.

Large Universal Decapping Die - Redding 69200

The Redding Large Universal Decapping Die is a dedicated reloading tool designed to punch spent primers out of brass cartridge cases without touching, sizing, or expanding the case neck and body. Machined from heat-treated alloy steel, it fits standard reloading presses using industry-standard 7/8"-14 TPI threading. Because the die body does not contact the brass, depriming requires no case lubrication, keeping dirty range brass from fouling full-length sizing dies during pre-cleaning workflows.

Key Features

Resizing-Free Depriming: Removes spent primers independently of the sizing process, preventing dirty carbon and grit from scratching expensive sizing dies.
No Lubrication Required: Eliminates the need for case lube prior to depriming, streamlining pre-wash brass preparation.
Broad Calibre Capability: Accommodates rifle and handgun cartridges from 7mm (.284 calibre) up to .50 calibre.
Extended Case Length Handling: Accepts cartridges with overall case lengths measuring up to 3.0 inches (76.2 mm).
Standard Press Integration: Features 7/8"-14 TPI threads to mount directly into standard single-stage, turret, or progressive reloading presses.

Specifications

Product: Redding Large Universal Decapping Die
Manufacturer Part Number (MPN): 69200
Thread Standard: 7/8"-14 TPI
Calibre Range: 7mm (.284 cal) up to .50 calibre
Maximum Case Length: 3.0 inches (76.2 mm)
Material: Heat-treated alloy steel
Packaged Weight: Approximately 200–250 g
Power Requirements: None (manual mechanical operation)
Replacement Rod Assembly: Large Decapping Rod (Part #69300)

Who is the Redding Large Universal Decapping Die for?

Handloaders cleaning brass prior to sizing — Deprimes spent primers without case lube or body contact, allowing thorough primer pocket cleaning in cases up to 3.0 inches in length before cases enter sizing dies.
Reloaders processing large-calibre cases — Provides a dedicated decapping die assembly specifically sized to clear neck diameters ranging from 7mm up to .50 calibre.

Less suitable for: Cartridges with a neck diameter under .25 calibre, which require a dedicated small-calibre decapping die or sub-calibre rod assembly to properly clear the smaller case neck.

SKU	RD41723LP
Model #	69200
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 49356 Carbide Size Button Kit .35 Calibre

$99.95

Redding 96020 G-rx Large 32 Oz High Density Polyet

$22.95

Rcbs R9803 Expander Decapping Unit 226 Calibre Ste

$37.95

Redding 74415 Small Base Body Die For 6.5mm 284 Wi

$127.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 69200 Large Universal Decapping Die 7mm To 50 Cal

Secure Payment Methods