Which specific die models are compatible with the Redding 69250 decapping rod?

The Redding 69250 decapping rod is designed exclusively for use with the Redding Small Universal Decapping Die (Item #69100) or as part of the Complete Universal Decapping Die Kit (#69500). Please note that it does not fit or function inside the Redding Large Decapping Die (#69200), which requires rod #69300 instead.

Can this decapping rod handle small flash hole brass like BR and PPC cases?

Yes, this rod is specifically engineered to accommodate small .060-inch (1.52 mm) flash holes commonly found on precision benchrest brass such as 6mm BR, 6 PPC, and small-primer 6.5 Creedmoor cases. The pin is sized to prevent the bending or jamming often experienced when using standard .080-inch pins on undersized flash holes.

What is the maximum case length supported when using this rod in my decapping setup?

The operating envelope is restricted by the Redding Small Die body, which handles case lengths up to 2.625 inches (66.68 mm). For longer cartridges exceeding 2.625 inches up to 3.000 inches, you will need to switch to the Large Decapping Die system.

Are there any specific Australian electrical or regulatory compliance requirements for this tool?

No electrical compliance such as 240V, SAA, or RCM certifications are required because this is a purely mechanical, non-powered reloading component. It is also an unrestricted accessory under Australian firearms laws and can be legally shipped to your home across all states and territories.

What maintenance is required to ensure the longevity of the hardened steel rod?

Constructed from durable hardened steel, the rod requires very little maintenance beyond keeping it clean and free of carbon buildup or grit from spent primers. Storing it in a dry reloading environment will protect it from corrosion during long-term storage.

Decapping Rod - Redding 69250

The Redding Universal Decapping Rod for .17–.20 Caliber Casings (Item #69250) is a hardened steel replacement and conversion rod engineered specifically for dedicated, non-sizing depriming of sub-calibre and small flash hole brass. Designed as a direct drop-in component for the Redding Small Universal Decapping Die (Item #69100), this rod allows reloaders to punch out spent primers prior to wet or ultrasonic case cleaning without damaging narrow case mouths or undersized flash holes. Weighing approximately 21 g (0.046 lb), it provides precise mechanical depriming for case lengths up to 2.625 inches (66.68 mm).

Key Features

Sub-Calibre Clearance: Calibrated specifically to enter .17 to .20 calibre case necks without catching or dragging on the case mouth.
Small Flash Hole Compatibility: Features an undersized decapping pin engineered to clear .060-inch (1.52 mm) flash holes without binding or bending.
Direct Drop-In Fit: Installs into the Redding Small Universal Decapping Die body by swapping out the standard assembly via the top retaining clip.
Hardened Steel Construction: Machined from hardened steel to resist bending under continuous mechanical reloading press operation.

Product Specifications

Material: Hardened steel
Product Weight: ~21 g (0.046 lb)
Supported Calibre Range: .17 to .20 calibre
Flash Hole Diameter: Accommodates small .060-inch (1.52 mm) flash holes
Maximum Supported Case Length: Up to 2.625 inches (66.68 mm)
Die Compatibility: Exclusively fits the Redding Small Universal Decapping Die (#69100); included in the Complete Universal Decapping Die Kit (#69500)
Operational Limit: For spent primers only; do not use to decap live primers

Who is the Redding Universal Decapping Rod for .17–.20 Caliber Casings for?

Varmint Hunters — Need to deprime .17 to .20 calibre cartridge cases such as .17 Hornet and .204 Ruger up to 2.625 inches (66.68 mm) in length without causing mouth deformation before ultrasonic or wet tumbling.
Precision Benchrest Reloaders — Require this universal decapping rod to clear small .060-inch (1.52 mm) flash holes found in precision brass such as 6mm BR and 6 PPC without bending or jamming standard-diameter decapping pins.

Less suitable for: Reloaders processing cases longer than the 2.625-inch (66.68 mm) threshold up to 3.000 inches, or cases running standard .25 calibre and larger necks in a large-body decapping die, who require a large-calibre decapping die rod assembly instead.

SKU	RD102720LP
Model #	69250
Brand	Redding
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Sellier & Bellot 300 Winchester Magnum Unprimed Br

$57.95

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 28132 Master Hunter Die Set 6.5x55 Swedish

Don't pay $502.95 $426.95 15.11% OFF

Redding 55742 Vld Seating Stem 22 Caliber Long Rel

$62.95

Redding 55748 Vld Seating Stem 7mm Long Competitio

$62.95

Redding 69500 Universal Decapping Die Kit Steel 7/

$136.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 69250 Decapping Rod 17 20 Caliber Small Flash Hole Steel

Secure Payment Methods