The Redding 6mm Creedmoor Type S - Elite Bushing Die Set (Manufacturer Model Number 60443) is a precision three-die reloading system engineered for match handloaders and long-range shooters. Built for standard SAAMI-spec 6mm Creedmoor cartridge cases using .243" diameter bullets, this set gives reloaders complete control over neck tension and bullet seating alignment. The set includes a Type S Bushing Full Length Sizing Die (Part #77443), a Type S Bushing Neck Sizing Die (Part #71443), and a Competition Bullet Seating Die (Part #55443) with a built-in micrometer head. Machined to standard 7/8"-14 reloading press threads, these dies integrate directly into single-stage and turret presses commonly used across Australian reloading benches.

Key Features:

• Dual Sizing Flexibility: Includes both a Type S Full Length Sizing Die to reset body dimensions and shoulder bump, and a Type S Neck Sizing Die for working fire-formed brass.
• Interchangeable Bushing System: Accepts self-centering neck bushings to precisely control neck tension in 0.001" increments without overworking cartridge brass.
• Competition Micrometer Seating: Features an internal sliding alignment sleeve that fully captures the cartridge case and aligns the .243" bullet before seating, coupled with a micrometer head adjustable in 0.001" increments.
• Standard Thread Mounting: Built with standard 7/8"-14 threads for compatibility with conventional reloading presses, including the Redding Big Boss, RCBS Rock Chucker, and Hornady Lock-N-Load.

Specifications:

• Calibre Compatibility: 6mm Creedmoor (.243" bullet diameter)
• Thread Standard: 7/8"-14 TPI
• Included Sizing Dies: Type S Full Length Sizer (#77443), Type S Neck Sizer (#71443)
• Included Seating Die: Competition Seating Die with Micrometer (#55443)
• Accommodated Bushing Sizes: 0.266" to 0.274" diameter (bushings sold separately)
• Required Shellholder: Standard Shellholder #1 (#11001) or Competition Shellholder #11601 (sold separately)
• Packaged Weight: Approximately 1.1–1.3 kg

Who is the Redding 6mm Creedmoor Type S - Elite Bushing Die Set for?

• Precision Rifle Series competitors — who require minimal bullet runout across their match ammunition, using this 6mm Creedmoor reloading die set's 0.001" micrometer seating adjustments and 7/8"-14 press compatibility to maintain consistent projectile depth during high-volume match preparation.
• Long-range benchrest shooters — who need precise brass neck control by swapping interchangeable bushings within the 0.266" to 0.274" range on this 6mm Creedmoor die set to match specific turned or unturned neck wall thicknesses.
• Precision 6mm Creedmoor handloaders — who require the versatility of a 3-die category set to switch between full-length sizing and fire-formed neck sizing while using standard 7/8"-14 threaded reloading presses.

Less suitable for: High-volume, non-precision reloading with mixed-brand unturned brass where individual neck-tension tuning is unnecessary (standard non-bushing 2-die sets are better suited), or extreme benchrest setups using arbor-press-actuated hand dies rather than standard 7/8"-14 threaded bench presses.