What die systems are compatible with the Redding 73289 .289 bushing?

The Redding 73289 bushing features a standard 1/2 inch outer diameter by 3/8 inch length, allowing it to freely interchange across all Redding bushing-style dies including Type S Neck Sizing Dies, Type S Full Length Sizing Dies, and Competition Bushing Neck Dies. It is also fully compatible with standard Wilson-style neck sizing dies for seamless integration into your reloading setup.

Do I need to lubricate case necks when using this standard heat-treated steel bushing?

Yes, case neck lubrication is strictly required when using this standard heat-treated steel bushing to prevent brass binding or scratching during the sizing stroke. If you prefer non-lubricated neck sizing, you should instead consider Redding's Titanium Nitride coated series, such as Model 76289, which features a lower friction coefficient.

What is the recommended sizing limit when stepping down brass with the 0.289 inch bushing?

Redding recommends that if a case neck requires more than 0.004 to 0.005 inches of total diameter reduction, sizing should be completed in multiple progressive bushing steps to prevent brass distortion or dented case shoulders. This 0.289 inch bushing is ideally suited for precision rifle calibres where loaded case neck diameters measure around 0.290 to 0.291 inches to achieve optimal 0.001 to 0.002 inch neck tension.

Are there any special firearm licensing endorsements required to purchase this bushing in Australia?

No special firearms licensing endorsements are required to purchase or own this bushing in any Australian state or territory. As a non-powered, mechanical reloading accessory, electrical compliance such as 240V mains power and SAA/RCM certifications are also not applicable.

Neck Sizing Bushing - Redding 73289

The Redding .289 Heat-Treated Steel Neck Sizing Bushing (MPN: 73289) is a precision reloading component engineered to size cartridge case necks to precise outer dimensions. By sizing only the outside diameter of the case neck, it eliminates the need for an expander ball to pull through the brass, controlling neck tension while preventing excessive working of the metal. Manufactured from hardened, heat-treated steel with a hand-polished interior bore, it minimizes sizing resistance and brass runout during operation.

Key Features

Precise Neck Tension Control: Directly sizes the outer case neck diameter down to 0.289 inches to yield uniform bullet release consistency and reduce neck runout.
Extended Brass Longevity: Prevents over-working of the cartridge brass by avoiding internal expander balls during the sizing stroke.
Hand-Polished Interior Bore: Finished with a polished internal surface to reduce friction and eliminate galling on lubricated case necks.
Broad Die Compatibility: Freely interchanges with all Redding Type S Neck Sizing Dies, Type S Full Length Sizing Dies, Redding Competition Bushing Neck Dies, and standard Wilson-style neck sizing dies.

Specifications

Internal Diameter (Sizing Size): 0.289 inches (stamped with size I.D.)
Outer Diameter: 1/2 inch (standard bushing O.D.)
Length: 3/8 inch
Material: Heat-treated steel
Surface Hardness: Approximately Rockwell C 60–62
Weight: Approximately 10–15 grams
Die Fitment: Redding Type S and Competition Bushing Dies, Wilson-style neck dies

Who is the Redding .289 Heat-Treated Steel Neck Sizing Bushing for?

Precision 6.5mm Handloaders — Requires a 0.289 inch internal sizing diameter to achieve precise 0.001 to 0.002-inch neck tension on loaded cartridges measuring 0.290 to 0.291 inches, commonly used for calibres such as 6.5 Creedmoor, 6.5x47 Lapua, and .260 Remington using this steel neck sizing bushing.

Less suitable for: Reloaders seeking a lubrication-free sizing process, who should use a Titanium Nitride (TiN) coated bushing, or cases requiring more than 0.004 inches to 0.005 inches of total neck diameter reduction, which requires intermediate stepping using multiple progressive bushing sizes to prevent brass distortion.

SKU	RD41769LP
Model #	73289
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 73292 Steel Neck Sizing Bushing 0.292 In

$52.95

Redding 73297 Neck Sizing Bushing .297 Steel 65mm

$52.95

Redding 73306 Steel Neck Sizing Bushing 0.306 In

$52.95

Redding 73307 Steel Neck Sizing Bushing 0307 Inch

$52.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 73289 Steel Neck Sizing Bushing .289 Inch

Secure Payment Methods