Do I need a separate decapping tool when using the Redding 74111 Small Base Body Die?

Yes, this die features a hollow, non-decapping construction with zero internal moving parts, meaning it has no decapping pin or expander ball. You will need to complete depriming using a separate dedicated decapping die or hand tool prior to resizing your .223 Remington cases.

Is a small base body die necessary if I am reloading .223 Remington for a standard factory bolt-action rifle?

Generally, no. Standard bolt-action rifles with typical SAAMI factory chambers do not require a small base die, and you would be better served by a standard Redding Body Die or Full-Length Sizing Die to avoid unnecessary brass working.

What shellholders are compatible with the Redding 223 Rem Small Base Body Die on a standard reloading press?

This die utilizes an industry-standard 7/8"-14 thread interface to fit most reloading presses. For shellholder compatibility, it pairs with a standard Redding Shellholder #10 (Part #11010) or the Redding Competition Shellholder Set #11610, which are sold separately.

Are there any special lubrication requirements for operating the Redding 74111 die?

Yes, because small base dies exert higher sizing pressure over a broader surface area to reduce the case diameter near the web/base, high-pressure case lubrication is strictly required. Proper lubrication prevents cases from becoming stuck inside the hardened heat-treated steel die during the sizing stroke.

223 Rem Small Base Die - Redding 74111

The Redding 223 Rem Small Base Body Die (MPN: 74111) is a dedicated metallic reloading die engineered to full-length resize the cartridge case body and bump back the shoulder position for .223 Remington and 5.56×45mm NATO brass. Designed specifically for tight-tolerance, custom match, semi-automatic, pump-action, or straight-pull chambers, it sizes the lower case diameter near the web slightly smaller than standard SAAMI-specification dies to ensure smooth feeding and reliable chambering. Built without an internal decapping pin or expander ball, this tool reshapes the case body and sets the headspace without contacting or altering the case neck.

Key Features

Targeted Body and Shoulder Resizing: Restores critical case body dimensions and bumps the shoulder back to maintain proper headspace while leaving the case neck untouched, making it an ideal companion tool for neck-sizing dies.
Small Base Geometry: Reduces the lower case body diameter fractions of a thousandth of an inch below standard full-length dies to eliminate chambering resistance and extraction failures in tight-fitting actions.
Hollow, Non-Decapping Construction: Features a solid, heat-treated steel internal profile without internal moving parts or decapping assemblies, requiring depriming to be completed separately.
Universal Press Mounting: Fits standard single-stage and progressive reloading presses using the industry-standard 7/8"-14 thread interface.

Specifications

Calibre Compatibility: .223 Remington / 5.56×45mm NATO
Manufacturer Part Number (MPN): 74111
Press Thread Interface: 7/8"-14 thread
Shellholder Compatibility: Standard Redding Shellholder #10 (Part #11010) or Competition Shellholder Set #11610
Product Weight: Approximately 230 g to 320 g (0.5–0.7 lbs)
Packaged Dimensions: Approximately 12.7 × 7.6 × 3.8 cm to 14.0 × 6.4 × 3.8 cm
Operation Type: Manual, mechanical reloading die (requires high-pressure case lubrication)

Who is the Redding 223 Rem Small Base Body Die for?

Semi-automatic and tight-chamber .223 Rem handloaders — provides critical clearance near the case web by sizing .223 Remington / 5.56×45mm NATO brass below standard SAAMI base dimensions using standard 7/8"-14 threaded reloading presses, ensuring reliable cycling and effortless extraction in restricted chambers without altering the neck.

Less suitable for: Standard factory-spec bolt-action rifles with typical SAAMI chambers that do not experience feeding resistance near the case head, where a standard body die or standard full-length sizing die is preferable to prevent unnecessary working of the brass.

SKU	RD41786LP
Model #	74111
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Lyman Ly-Pc45 Premium Carbide 4 Die Set .45 Acp No

$305.95

Redding 77317 Type S Sizing Die 6mm Br Bushing Ful

$178.95

Redding 80269r Full Length Die Set 375 Ruger 2-Die

$201.95

Redding 75318 Full Length Body Reloading Die For 2

$103.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 74111 Small Base Body Die 223 Remington Reloading Tool

Secure Payment Methods