Will the Redding 6.5 Creedmoor Small Base Body Die resize the case neck or decap primers?

No, this die is strictly designed to resize the case body and bump the shoulder back without touching the neck. It also contains no internal decapping hardware or expander ball, meaning you will need to handle decapping as a separate step or use it in conjunction with a dedicated neck sizing die like the Redding Type S.

What shellholder do I need to use with the Redding 74446 Small Base Body Die on my reloading press?

This die requires either a standard Redding Shellholder #1 or a Redding Competition Shellholder Set #1, both of which are sold separately. It features an industry-standard 7/8"-14 thread interface making it fully compatible with all common single-stage and progressive presses used by Australian handloaders.

When should I choose this small base body die over a standard full-length sizing die for my 6.5 Creedmoor brass?

You should use this small base variant if you are reloading for a semi-automatic rifle or a tight custom match chamber where standard-sized brass fails to chamber or extract smoothly. It sizes the lower case wall slightly tighter than standard SAAMI specs, though standard full-length dies are still recommended for normal factory bolt-action rifles to avoid over-working the brass.

Does this mechanical reloading die require any electrical compliance certifications for use in Australia?

No, the Redding 6.5 Creedmoor Small Base Body Die is a completely manual, mechanical tool requiring no electrical power, batteries, or SAA/RCM certifications. It is built entirely from heat-treated steel and is ready for manual setup on your bench right out of the box.

6.5 Creedmoor Body Die - Redding 74446

The Redding 6.5 Creedmoor Small Base Body Die is a dedicated metallic reloading die engineered to resize the case body and bump the shoulder back to correct headspace dimensions without contacting or altering the case neck. Designed specifically for 6.5mm Creedmoor cases, it features a small base profile that sizes slightly tighter along the lower case wall and web area compared to standard full-length dies. Built with an industry-standard 7/8"-14 thread interface, this manual reloading tool contains no internal decapping assembly or expander ball, allowing handloaders to control case dimensions without disturbing tuned neck tension.

Key Features

Body and Shoulder Sizing: Restores factory headspace and resizes the case body without touching the case neck or altering tuned neck dimensions.
Small Base Dimensioning: Delivers tighter sizing along the lower case wall and web area to ensure smooth feeding and reliable extraction.
Non-Decapping Design: Built without an internal decapping rod or expander ball, leaving primer removal as a separate, isolated step.
Universal Press Compatibility: Features standard 7/8"-14 threading to fit all standard single-stage and progressive reloading presses.

Specifications

Manufacturer Part Number (MPN): 74446
Calibre Compatibility: 6.5mm Creedmoor (0.264" bullet diameter)
Thread Interface: 7/8"-14 standard reloading thread
Shellholder Requirement: Standard Redding Shellholder #1 (Part #11001) or Redding Competition Shellholder Set #1 (Part #11601); sold separately
Tool Type: Mechanical non-powered small base body die
Shipping Weight: Approximately 0.2–0.3 kg

Who is the Redding 6.5 Creedmoor Small Base Body Die for?

Semi-Automatic and Match-Chamber Shooters — Provides tighter lower-web sizing on 6.5mm Creedmoor cases using standard 7/8"-14 threaded presses, ensuring reliable chambering and smooth extraction in tight custom chambers or semi-automatic actions where standard-dimension brass may fail to chamber fully.
Precision Handloaders Using Bushing Neck Dies — Allows isolated body sizing and shoulder bumping for 6.5mm Creedmoor cases across a 7/8"-14 press without touching the neck, making this small base body die ideal for integration into multi-step sizing routines alongside dedicated bushing neck dies.

Less suitable for: Handloaders working with other 6.5mm calibres (such as 6.5 PRC, 6.5x47 Lapua, or 6.5x55 Swedish), shooters requiring an all-in-one single-step resizing and decapping operation, or standard bolt-action shooters who do not need tight base reduction; a standard full-length sizing die or calibre-specific standard body die fits those requirements better.

SKU	RD41789LP
Model #	74446
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Others Also Bought

Lee Precision Decapping Die Unit 90292

$33.95

Recommended Products

Redding 80443 6mm Creedmoor Full Length Die Set 7/

$201.95

Redding 88191 Titanium Carbide 3-Die Set 45 Colt 4

$272.95

Redding 84287 204 Ruger Deluxe Reloading Die Set F

$214.95

Redding 74155 Small Base Body Die 308 Winchester R

$120.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 74446 Small Base Body Die 6.5 Creedmoor 7/8-14 Thread

Secure Payment Methods