What reloading press threading and shellholders are compatible with the Redding 243 Win Body Die?

The Redding 243 Win Body Die features industry-standard 7/8"-14 threading, making it fully compatible with almost all single-stage and turret reloading presses available in Australia. For shellholder compatibility, it requires a standard Redding Shellholder #1 (Part #11001) or Redding Competition Shellholders, which are sold separately.

Does this body die resize the cartridge neck or deprime fired .243 Winchester brass?

No, this die is constructed without an expander ball, depriming stem, or decapping assembly, meaning it does not touch or work-harden the cartridge neck. You must perform depriming using an independent universal decapping tool or die, and pair this product with a neck sizing die such as the Redding Type S Bushing Neck Die to maintain precise neck tension.

Are there any electrical compliance requirements or special import regulations for this tool in Australia?

As a purely mechanical and manually operated reloading tool, the Redding 75114 requires no mains electricity, batteries, or external motors, so 240V compatibility and SAA/RCM certifications do not apply. Additionally, reloading dies are classified as non-controlled accessories and can be imported and purchased without restriction across all Australian states and territories.

When should I choose this standard Body Die versus the Small Base Body Die (#74114) for my .243 Winchester?

The standard Redding Body Die (Model 75114) is designed to resize fired cartridge case bodies and bump shoulders for normal chamber tolerances without touching the neck. However, if you are reloading for tight custom chambers or semi-automatic auto-loaders that experience chambering resistance, Redding recommends using their Small Base Body Die (#74114) instead.

.243 Win Body Die - Redding 75114

The Redding .243 Winchester Body Die is a dedicated reloading die designed to resize the case body and bump the shoulder back to correct headspace dimensions without contacting or working the case neck. Engineered for fired .243 Winchester cartridge brass, it contains no internal depriming assembly or expander ball. This allows handloaders to restore chambering reliability on brass that exhibits bolt-closure resistance while preserving established neck tension. It mounts to manual reloading presses using standard 7/8"-14 threads and requires case lubrication prior to sizing.

Key Features

Body Resizing and Shoulder Bumping: Restores factory case body tolerances and pushes the shoulder back to maintain SAAMI headspace without touching or work-hardening the case neck.
Internal Neck Clearance: Machined with excessive internal clearance at the neck section, preventing any resizing of the neck diameter during the press stroke.
No Internal Components: Operates without an expander ball, depriming stem, or decapping assembly to eliminate drag through the neck.
Companion Die Workflow: Designed to pair with bushing-style neck sizing dies or universal decapping dies, enabling separate control over neck tension, decapping, and case body dimensions.

Specifications

Calibre: .243 Winchester
Thread Standard: 7/8"-14 standard press threading
Shellholder Compatibility: Redding Shellholder #1 or Redding Competition Shellholders
Product Weight: Approximately 0.4 lbs (181 g)
Overall Length: Approximately 5.30 inches
Operation: Manual press-mounted (unpowered)
Manufacturer Part Number: 75114

Who is the Redding 243 Win Body Die for?

Precision handloaders using .243 Winchester match brass — provides a dedicated reloading body sizing die to bump the shoulder and reduce outer case dimensions back to specification on fired .243 Winchester cases without disturbing fine neck-tension adjustments.
Reloaders pairing neck sizing dies with separate body sizing steps — delivers an independent 0.4 lbs sizing tool threaded in 7/8"-14 to correct bolt-close resistance on fired brass only when required, isolating body dimensioning from the neck sizing process.

Less suitable for: Handloaders seeking single-step sizing and depriming (a standard full-length sizing die with an integrated decapping assembly fits better), shooters resizing brass for tight custom or semi-automatic chambers experiencing chambering resistance (a small base body die fits better), or any application involving live, loaded ammunition.

SKU	RD41791LP
Model #	75114
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 80443 6mm Creedmoor Full Length Die Set 7/

$201.95

Redding 88191 Titanium Carbide 3-Die Set 45 Colt 4

$272.95

Redding 84287 204 Ruger Deluxe Reloading Die Set F

$214.95

Redding 74155 Small Base Body Die 308 Winchester R

$120.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 75114 243 Winchester Body Die 7/8"-14 Thread

Secure Payment Methods