What reloading presses are compatible with the Redding 75317 6mm BR Remington Body Die?

The Redding 75317 body die features an industry-standard 7/8"-14 thread interface, making it fully compatible with all single-stage and turret reloading presses commonly used in Australia, including models from Redding, RCBS, Hornady, Lyman, and Lee.

Does this die resize the case neck or punch out fired primers?

No, this is a dedicated body die containing no internal moving parts, meaning it does not touch the case neck or remove fired primers. It is specifically designed to full-length resize the case body and bump the shoulder, requiring you to use a separate neck-sizing or bushing die—such as the Redding Titanium Nitride Neck Sizing Bushing in the appropriate size—alongside a separate depriming tool.

Which shellholder do I need to use with the Redding 75317?

This die requires a standard Redding Shellholder #1 (Part #11001) or a Redding Competition Shellholder #1 (Part #11601), which must be purchased separately to correctly seat and extract the 6mm BR Remington brass during the operation.

Can I use the Redding 75317 body die with standard .243 Winchester or standard 6mm Remington cartridges?

No, the Redding 75317 is strictly engineered for standard 6mm BR Remington (Bench Rest) cartridge cases. It is incompatible with standard .243 Winchester or non-BR 6mm Remington cartridges due to significant differences in case dimensions and shoulder geometry.

Does this manual reloading tool require any electrical certification or compliance in Australia?

As an entirely manual, non-powered mechanical reloading tool, the Redding 75317 does not require mains power, an Australian 240V power plug, or SAA/RCM regulatory electrical compliance, allowing you to set it up immediately on your workshop bench.

6mm BR Body Die - Redding 75317

The Redding 6mm BR Remington Body Die (Manufacturer Part Number: 75317) is a dedicated precision reloading tool engineered to resize the case body and bump the shoulder back to correct headspace dimensions on 6mm BR Remington brass. Machined from heat-treated steel, this die is designed with no internal decapping assembly or neck-sizing surfaces. This allows handloaders to restore smooth chambering and reliable bolt closure on repeated-firing cases without altering the neck diameter, working neck tension, or disrupting fire-formed case concentricity.

Key Features

Selective Case Resizing: Full-length resizes the cartridge body and sets back (bumps) the shoulder angle on 6mm BR Remington cases while leaving the neck entirely untouched.
Heat-Treated Steel Construction: Precision-machined from hardened alloy steel to withstand continuous reloading pressure and maintain exact internal dimensions.
Universal Press Threading: Built with industry-standard 7/8"-14 threads to mount directly into standard single-stage and turret reloading presses.
Separate Neck Tension Control: Allows handloaders to use dedicated bushing or neck-sizing dies independently to manage precise neck tension and preserve case life.

Specifications

Product: Redding 6mm BR Remington Body Die
Part Number: 75317
Calibre Compatibility: 6mm BR Remington (6mm Bench Rest Remington; 6mm / .243 in bullet diameter)
Die Thread Interface: 7/8"-14 standard thread
Shellholder Requirement: Standard Redding Shellholder #1 or Redding Competition Shellholder #1 (sold separately)
Material: Heat-treated, precision-machined steel
Internal Assembly: Non-decapping, non-neck-sizing solid body profile
Power Requirements: None (manual reloading equipment)

Who is the Redding 6mm BR Remington Body Die for?

Competitive benchrest reloaders — Requires exact cartridge headspace on 6mm BR Remington brass using standard 7/8"-14 thread presses to maintain effortless bolt closure during competition strings without overworking the brass.
Precision rifle handloaders — Needs a 6mm BR Remington body die to bump the shoulder and reduce body expansion while preserving custom fire-formed neck dimensions and concentricity established by separate neck-bushing dies.

Less suitable for: Handloaders seeking single-step reloading (this tool does not decap spent primers or size the case neck) or those chambered in standard .243 Winchester or full-length 6mm Remington cartridges; handloaders needing single-pass decapping and full sizing require a standard full-length resizing die with an integrated decapping rod assembly.

SKU	RD102857LP
Model #	75317
Brand	Redding
Shipping Weight	0.1000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

Don't pay $488.95 $414.95 15.13% OFF

A-zoom Precision 357 Magnum Metal Snap Caps Solid

$53.95

A-zoom Perfect 45 Acp Striker Snap Caps Centering

Don't pay $22.95 $15.00 34.64% OFF

Grovtec Gtsw07 Machine Screw Fore End Swivel Set 1

$26.95

Recommended Products

Redding 28132 Master Hunter Die Set 6.5x55 Swedish

Don't pay $502.95 $426.95 15.11% OFF

Redding 38317 Match Die Set 6mm Br Bushing Neck

Don't pay $590.95 $501.95 15.06% OFF

Redding 75288 Steel Body Die 300 Rum Reloading Too

$99.95

Redding 75479 6.5x47 Lapua Body Die Steel Construc

$118.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 75317 6mm Br Remington Body Die 7/8"-14 Thread

Secure Payment Methods