What reloading dies are compatible with the Redding 76260 Titanium Nitride bushing?

This bushing is designed to fit all Redding Bushing-Style Sizing Dies, including Type S Bushing Full Dies, Type S Neck Sizing Dies, Competition Neck Sizing Dies, and standard Wilson-style neck sizing dies. It is built exclusively for standard 1/2-inch outer diameter die pockets and is not compatible with standard non-bushing full-length sizing dies or large-calibre oversized bushing dies.

How do I calculate the correct bushing size, and is this 0.260-inch model right for my brass?

The correct sizing diameter is typically calculated by measuring the neck diameter of a loaded dummy round with your chosen bullet seated, then subtracting 0.001 to 0.002 inches for proper tension. The 0.260-inch sizing diameter is primarily used for precision 6mm cartridges such as 6mm BR, 6mm Creedmoor, 6mm Dasher, or 6x47 Lapua, depending on your specific brass neck-wall thickness.

Does the Titanium Nitride (TiN) coating mean I can skip case neck lubrication during sizing?

No. While the ultra-hard gold TiN surface significantly reduces sizing drag, brass galling, and bushing wear compared to standard heat-treated steel, the manufacturer still explicitly recommends applying a light case neck lubricant during the sizing process to prevent brass from sticking.

Do I need any special permits, firearm licences, or electrical compliance approvals to purchase this bushing in Australia?

No permits or firearm licences are required to purchase or possess this reloading accessory, as it is classified as an unregulated mechanical component across all Australian states and territories. Furthermore, because it is an unpowered, manual reloading component with no electrical parts, it does not require mains power, 240V compatibility, SAA approval, or RCM compliance.

Neck Sizing Bushing - Redding 76260

The Redding .260 Titanium Nitride Neck Sizing Bushing (MPN: 76260) is a precision metallic reloading component designed to control case neck sizing in exact increments. Built for standard bushing-style dies, it sizes case necks to an inside diameter of 0.260 inches without overworking brass or requiring standard expander balls, helping to minimise bullet runout. Constructed from heat-treated steel with a surface hardness of Rc 60–62, it features a durable Titanium Nitride (TiN) coating that reduces sizing friction and protects against brass galling.

Key Features

Titanium Nitride Coating: Low-friction gold TiN surface finish reduces sizing drag, brass resistance, and surface wear during repetitive sizing operations.
Precise Neck Tension Control: Directly sizes the exterior case neck to a precise 0.260-inch diameter to achieve uniform bullet release and seating tension.
Standard Fit Dimensions: Measures 1/2 inch (12.7 mm) in outer diameter by 3/8 inch (9.525 mm) in length for direct compatibility across standard bushing die pockets.
Clear Identification: Laser or roll-marked with size identity (.260) for rapid sorting and selection on the reloading bench.
Universal System Compatibility: Freely interchanges within Redding Type S Bushing Full Dies, Type S Neck Sizing Dies, Competition Neck Sizing Dies, and standard Wilson-style neck sizing dies.

Specifications

Inside Diameter (Sizing Diameter): 0.260 inches
Outer Diameter: 1/2 in (12.7 mm)
Length: 3/8 in (9.525 mm)
Base Material: Heat-treated steel (Rc 60–62 core hardness)
Surface Finish: Titanium Nitride (TiN) coating
Weight: Approximately 10–15 grams (unit weight)
Die Pocket Compatibility: Standard 1/2" OD bushing cavities (Redding Type S, Competition Neck, Wilson-style)

Who is the Redding .260 Titanium Nitride Neck Sizing Bushing for?

Long-range precision rifle competitors loading 6mm cartridges — requires the exact 0.260-inch inside diameter of this Titanium Nitride neck sizing bushing to achieve proper bullet seating tension on specific 6mm brass neck walls (such as 6mm Creedmoor, 6mm BR, or 6mm Dasher) without overworking the case brass.
Handloaders seeking exact neck tension control to reduce bullet runout — relies on the 1/2-inch (12.7 mm) outer diameter by 3/8-inch (9.525 mm) length footprint and Rc 60–62 core steel construction of this neck sizing bushing to eliminate the need for standard die expander buttons and ensure concentric case necks.

Less suitable for: Standard non-bushing full-length sizing dies or large-calibre oversized setups (such as .50 BMG or 1-1/4-inch die platforms); handloaders running those configurations require standard fixed-dimension sizing dies or dedicated large-calibre oversized bushing dies.

SKU	RD41809LP
Model #	76260
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 49356 Carbide Size Button Kit .35 Calibre

$99.95

Redding 96020 G-rx Large 32 Oz High Density Polyet

$22.95

Rcbs R9803 Expander Decapping Unit 226 Calibre Ste

$37.95

Redding 74415 Small Base Body Die For 6.5mm 284 Wi

$127.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 76260 Neck Sizing Bushing .260 Tin Coated

Secure Payment Methods