What reloading dies are compatible with the Redding 76263 Titanium Nitride Neck Sizing Bushing?

The Redding 76263 bushing features standard external dimensions of a 1/2 inch outer diameter (0.500") and a 3/8 inch height (0.375"). It is designed to freely interchange across all Redding Bushing-style dies, including Type S Neck Bushing Dies, Type S Full Length Bushing Dies, and Competition Bushing Neck Sizing Dies, as well as standard Wilson-style neck sizing dies.

How do I determine if the 0.263 inch size is correct for my 6mm cartridges?

The 0.263" inside diameter bushing is typically utilized for precision 6mm and .243 calibre cartridges such as 6mm Creedmoor, 6mm BR, 6mm DASHER, or .243 Winchester. Handloaders should measure their loaded cartridge outside neck diameter and subtract 0.001" to 0.002" to determine the optimal bushing size, which generally suits brass with a loaded neck wall measurement between 0.264" and 0.265".

Are there any specific Australian electrical or regulatory standards required for this reloading bushing?

No. The Redding 76263 is a purely mechanical, non-powered reloading tool component. Therefore, Australian 240V compatibility, SAA approvals, RCM certifications, and Australian power plugs are not applicable, and it is fully compliant for import and use across all Australian states and territories.

What are the sizing limits when using the Titanium Nitride Neck Sizing Bushing?

Manufacturer guidelines recommend resizing case necks in incremental single steps of 0.002" to 0.004" at a time. For brass requiring extreme neck reductions greater than 0.005", you should step down progressively through intermediate bushings or anneal the brass first to prevent shoulder collapse.

Redding Neck Bushing - Redding 76263

The Redding .263 Titanium Nitride Neck Sizing Bushing (MPN: 76263) provides precision handloaders with exact control over cartridge case neck tension and bullet grip. Machined from heat-treated steel and finished with a physical vapor deposition Titanium Nitride (TiN) coating, this bushing increases surface hardness and lowers friction during the sizing stroke to resist brass buildup and extend tool life. It is designed to interchange freely across all Redding Type S Neck Bushing Dies, Type S Full Length Bushing Dies, Competition Bushing Neck Sizing Dies, and standard Wilson-style neck sizing dies.

Key Features

Precise Neck Tension Sizing: Delivers an internal diameter of 0.263 inches, allowing handloaders to establish consistent bullet release without over-working the brass.
Titanium Nitride (TiN) Surface Coating: Reduces friction and required sizing effort while offering superior wear resistance against brass galling compared to standard steel bushings.
Universal Compatibility: Fits all die bodies accepting standard 1/2-inch outer diameter by 3/8-inch height bushing dimensions.
Clear Markings: Stamped clearly with its 0.263-inch sizing dimension for fast identification on the reloading bench.

Specifications

Manufacturer Part Number (MPN): 76263
Inside Sizing Diameter: 0.263 inches
Outer Diameter: 1/2 inch (0.500 inches)
Height / Length: 3/8 inch (0.375 inches)
Base Material: Heat-treated steel
Surface Finish: Titanium Nitride (TiN) coating
Unit Weight: Approximately 0.02–0.03 kg (0.8–1.0 oz)
Die Compatibility: Redding Type S Neck, Type S Full Length, and Competition Bushing Dies; Wilson-style neck sizing dies

Who is the Redding .263 Titanium Nitride Neck Sizing Bushing for?

Precision rifle handloaders loading 6mm cartridges — sizing brass for cartridges like 6mm Creedmoor, 6mm BR, 6mm DASHER, or .243 Winchester where loaded neck outside diameters measure between 0.264 inches and 0.265 inches, this titanium nitride neck sizing bushing provides the exact 0.263-inch inside diameter required to establish 0.001-inch to 0.002-inch of uniform neck tension.

Less suitable for: Cases requiring extreme neck diameter reductions greater than 0.005 inches in a single pass (which require progressive reduction using intermediate-sized bushings or case annealing), cartridges outside the nominal 6mm spectrum, or brass with loaded neck dimensions outside the 0.264"–0.265" range, which require alternative bushing sizes ranging from .185" through .368" or standard non-bushing full length sizing dies.

SKU	RD41810LP
Model #	76263
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 49356 Carbide Size Button Kit .35 Calibre

$99.95

Redding 96020 G-rx Large 32 Oz High Density Polyet

$22.95

Rcbs R9803 Expander Decapping Unit 226 Calibre Ste

$37.95

Redding 74415 Small Base Body Die For 6.5mm 284 Wi

$127.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 76263 Titanium Nitride Neck Sizing Bushing 263 Inch

Secure Payment Methods