What reloading dies are compatible with the Redding 0.282 Titanium Nitride Neck Sizing Bushing?

This bushing features standard external dimensions of 1/2-inch outer diameter and 3/8-inch length, allowing it to freely interchange across all Redding bushing-style dies, including Type S Bushing Neck Dies, Type S Full Length Dies, and Competition Bushing Neck Sizing Dies, as well as L.E. Wilson and other standard 1/2-inch bushing dies.

How does the Titanium Nitride (TiN) coating improve performance over standard steel bushings?

The Titanium Nitride surface treatment is applied over a precision-machined steel base heat-treated to Rc 60-62, significantly increasing surface hardness. This coating minimises friction and brass galling during the sizing process, reducing required sizing effort and extending the working lifespan of both your brass and the bushing.

What is the maximum single-pass reduction limit I can perform with this 0.282 inch bushing?

Redding advises against sizing down cartridge case neck diameters by more than 0.004 to 0.005 inches in a single pass with a single bushing. If you need to step down brass necks by a greater margin, you must use intermediate bushing sizes sequentially to avoid neck-shoulder concentricity defects or shoulder collapse.

Do I need any special permits or electrical compliance certifications to purchase this reloading component in Australia?

As a purely mechanical reloading tool, the Redding sizing bushing does not require 240V power, SAA/RCM electrical safety compliance, or any special firearm permits for purchase under Australian state and territory legislation.

Neck Sizing Bushing - Redding 76282

The Redding .282 Titanium Nitride Neck Sizing Bushing (MPN 76282) is a precision metallic reloading component engineered to size cartridge case necks to an exact dimension without overworking brass. Featuring an internal sizing diameter of 0.282 inches, this bushing establishes precise bullet grip and neck tension without requiring an expander ball. Built with standard 1/2-inch (0.500") outer diameter and 3/8-inch (0.375") length dimensions, it freely interchanges across all Redding Type S Bushing Neck Dies, Type S Full Length Dies, Competition Bushing Neck Sizing Dies, and standard 1/2-inch dies from brands such as L.E. Wilson.

Key Features

Titanium Nitride (TiN) Surface Treatment: Coated over a heat-treated steel base (heat-treated to approximately Rc 60–62) to increase surface hardness, reduce sizing friction, and minimise brass galling.
Neck Tension Customisation: Accurately sizes the neck down to 0.282 inches, letting handloaders set neck tension typically 0.001 to 0.003 inches under the loaded neck diameter.
Extended Brass Life: Eliminates excessive working of the case neck and minimises neck runout compared to standard full-length sizing dies with expander buttons.
Universal Outer Dimensions: Built with a 0.500-inch outer diameter and 0.375-inch height for compatibility across standard bushing reloading dies.

Specifications

Manufacturer: Redding Reloading Equipment
Model / MPN: 76282
Inner Diameter (Sizing Diameter): 0.282 inches
Outer Diameter: 1/2 inch (0.500 inches)
Length: 3/8 inch (0.375 inches)
Weight: Approximately 15–30 grams
Material & Finish: Heat-treated steel core (Rc 60–62) with Titanium Nitride (TiN) coating
Die Compatibility: Redding Type S Bushing Neck Dies, Type S Full Length Dies, Competition Bushing Neck Dies, and standard 0.500-inch die cavities

Who is the Redding .282 Titanium Nitride Neck Sizing Bushing for?

Handloaders loading 6.5mm precision rifle cartridges for benchrest and long-range shooting — requires a 0.282-inch inner diameter neck sizing bushing to achieve 0.001" to 0.003" neck tension on brass with loaded neck dimensions measuring approximately 0.283" to 0.285" (such as 6.5 Creedmoor, 6.5x47 Lapua, or .260 Remington).
Handloaders seeking to extend brass life and minimise neck runout using bushing-style reloading dies — relies on the 1/2-inch (0.500") outer diameter format to precisely control neck sizing without using an expander ball, preventing concentricity defects.

Less suitable for: Handloaders sizing neck diameters down by more than 0.005 inches in a single pass (which requires intermediate step-down bushings to prevent shoulder collapse), or calibres requiring outside neck dimensions other than 0.282 inches (which require alternative bushing diameters within Redding's .185" to .368" range).

SKU	RD41813LP
Model #	76282
Brand	Redding
Shipping Weight	1.0000kg

What our Customers are Saying

We Also Recommend

Lee Breech Lock Challenger Kit Iii - With Auto Be

$414.95

Pro-shot 1ps-38-17 Stainless Steel Rifle Cleaning

$122.95

Kleenbore Cp16b Cotton Cleaning Patches 1.25 Inch

$32.95

Recommended Products

Redding 49356 Carbide Size Button Kit .35 Calibre

$99.95

Redding 96020 G-rx Large 32 Oz High Density Polyet

$22.95

Rcbs R9803 Expander Decapping Unit 226 Calibre Ste

$37.95

Redding 74415 Small Base Body Die For 6.5mm 284 Wi

$127.95

Welcome to Xhunter Australia. By accessing and using our website (www.xhunter.com.au) and purchasing from our online store, you agree to be bound by the following Terms and Conditions. Please read them carefully before proceeding.

1. Eligibility

By agreeing to these Terms and Conditions, you confirm that:

• You are at least 18 years of age.
• You are legally capable of entering into a binding contract under Australian law.
• You will not purchase any restricted or controlled items unless legally permitted to do so.

2. Product Information

• All products listed are subject to availability.
• Product descriptions, specifications, and pricing are subject to change without notice.
• We make every effort to display products accurately, although we do not guarantee that all images or content are error-free.

3. Orders and Payments

• All orders are subject to acceptance and confirmation.
• Prices are in AUD and include GST unless otherwise stated.
• We reserve the right to cancel or refuse any order at our sole discretion.
• Full payment is required before dispatch.

4. Authority to Leave (ATL) and Delivery

• By default, all orders are shipped with Authority to Leave (ATL).
• If you require Signature on Delivery, please contact us prior to purchasing. Additional charges apply.
• If an order is returned to us due to failed delivery or non-receipt when ATL is not permitted, a $25 return processing fee must be paid before reshipment or refund.

5. Returns and Refunds

• Please refer to our full Returns Policy on the website.
• Returned items must be in original, resalable condition unless faulty.
• A restocking fee may apply if an item is not in reselling condition.
• Change-of-mind returns may not be accepted for clearance or custom-ordered items.

6. Firearms and Restricted Items

• You must comply with all relevant State and Federal laws for regulated products.
• You are responsible for ensuring proper licences and permits are held.
• We reserve the right to request proof of eligibility before dispatch.

7. Limitation of Liability

• Xhunter Australia is not liable for direct or indirect losses arising from the use or misuse of products.
• We are not responsible for any unauthorised modifications or incorrect application of products.

8. Manufacturer Warranty Support

Some products sold by Xhunter Australia include a manufacturer’s warranty (for example, limited lifetime warranties). These warranties are provided solely by the manufacturer and are separate from the consumer guarantees under Australian Consumer Law.

Where a manufacturer provides a warranty:

A. The warranty is offered and honoured by the manufacturer, not by Xhunter Australia, unless expressly stated otherwise.
B. Customers may be required to contact the manufacturer directly and comply with their warranty process, which may include overseas product assessment.
C. Proof of purchase is required to lodge a manufacturer warranty claim.
D. Assistance provided by Xhunter Australia in lodging warranty claims is a goodwill service only and does not imply liability for warranty outcomes or decisions.

Nothing in this clause limits your rights under Australian Consumer Law.
Xhunter Australia remains responsible for providing legally required remedies for products that fail to meet the consumer guarantees of acceptable quality, fitness for purpose, and reasonable durability.

9. Privacy

Your personal information is collected, used, and stored in accordance with our Privacy Policy.

10. Intellectual Property

All text, graphics, logos, and images on this website remain the property of Xhunter Australia and are protected by copyright laws.

11. Amendments

We may update or modify these Terms and Conditions at any time without prior notice. Continued use of our site constitutes acceptance of any updated Terms.

12. Governing Law

These Terms and Conditions are governed by the laws of Victoria, Australia. Any disputes will be handled exclusively by the courts of Victoria.

13. 18+ Age Requirement

By placing an order, you confirm that you are at least 18 years of age and legally entitled to purchase the products ordered. We may cancel any order that breaches this requirement.

Redding 76282 Neck Sizing Bushing .282 Titanium Nitride

Secure Payment Methods